L2250 Rear Hydraulic Fill

[521]

Over the rear PTO is a fill inlet. I opened it the other day and I can not see a level. Clearly needs to be filled but without a dipstick of sorts - not sure what level to fill to. Also - what viscosity does it need? Can I use UDT?

Thanks,

 

[North Idaho Wolfman]

You won't see the fluid in the fill ports, there is two fill ports one in the rear and one just in front of the seat, and they both fill the same reservoir.
Do not overfill it.

The fluid gauge for level is a site glass, it is on the left side just above where your foot sits in a window in the steel clutch housing cover.

Yes UDT is the proper fluid to use on this tractor.

 

[521]

Thank you!