L Series Switch Lever Wiring

[jp2code]

Could someone kindly send me a wiring diagram of the SWITCH LEVER, Ref #50, Part Number TC220-43900?

I'm mowing pasture about 5 miles from my truck. A limb must have yanked the switch off. It would not even crank.

I have wire pliers. I pulled the connectors off, and hard wired it. Now it cranks, but will not start.

Obviously, something is wrong.

Reply here or text me. 903-215-0350

I'm stuck out here RIGHT NOW!

 

[jp2code]

There are 4 wires.

1. Black
2. Black with White Stripe
3. Red with Black Stripe
4. Black with Yellow Stripe

1 to 2 connected and 3 to 4 connected will crank, but not start.

 

[Jim L.]

Tie B/W to R/B, hot.

Tie B/Y to B, ground.

PTO to off.

 

[jp2code]

Tie B/W to R/B, hot.

Tie B/Y to B, ground.

PTO to off.

You are alright with me, Jim.

Thanks!

 

[200mph]

Tie B/W to R/B, hot.

Tie B/Y to B, ground.

PTO to off.

Typo? Should this be G/Y and not B/Y? ie: Tie G/Y to B, ground

 

[jp2code]

Typo? Should this be G/Y and not B/Y? ie: Tie G/Y to B, ground

In Post #2, I provided a picture of the wires. To my eyes, none of the wires have any green on them.

 

[jp2code]

UPDATE: Working great, Jim. Thanks!