Kubota BX1850D won't start

ladyyarddog

New member

Equipment
Kubota BX1850D
Jul 17, 2016
3
0
0
Arlington, TX
Starter won't engage. Battery, starter, key switch, seat switch all good. Is there a fusible link or another safety switch somewhere?
 
Last edited:

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,972
2,825
113
Bedford - VA
Starter won't engage. Battery, starter, key switch, seat switch all good. Is there a fusible link or another safety switch somewhere?
Tell us how you know all those other parts are "good?"

Yes - there are fusible links - not sure without digging if/where yours is located.

YOU have a volt/ohm meter? If so - check voltage @ starter while key is turned.

report back with any news
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,391
8,703
113
Sandpoint, ID
Safety switches are usually the first cause of a no start.

Check PTO levers (in off position) and HST pedal (centered).
 

ladyyarddog

New member

Equipment
Kubota BX1850D
Jul 17, 2016
3
0
0
Arlington, TX
Tell us how you know all those other parts are "good?"
Yes - there are fusible links - not sure without digging if/where yours is located.

YOU have a volt/ohm meter? If so - check voltage @ starter while key is turned.

report back with any news

Checked all parts with vom meter. Finally found HST switch hidden behind right rear wheel needed adjusting. Starts every time now. Thanks for responding.