Hi again all,
Picked up a '14 L6060 from a John Deere dealer. Has about 600h on it. They gave me the services JD preformed and noticed that they used the following fluids from JD:
Qty: 2 TY22062 JD HY-GARD 2.5GAL
Qty: 1 TY26675 JD PLUS-50 II, 15w-40, 2.5GAL
The filters they used were all the Kubotas:
HH167-32430 - Engine Oil Filter
HHTA0-37710 - Hydraulic Filter
HHTA0-59900 - HST Filter
HH1J1-43172 - Fuel Filter
1G311-43380 - Separator
My concern is the fluids-
Engine Oil, Manual says SAE 15w-40... the TY26675 JD PLUS-50 II, 15w-40, 2.5GAL does not show SAE on the container, I can only assume this is fine though? Req. 9.9 qts, is a hair under 2.5gal so this must have been fully changed.
Trans Oil, First, it's showing 2 - 2.5gal... so 5gal worth. Manual says theres 11.9 gals to change out. So I can only assume that when they changed the Hydraulic Filter and the HST filter that a lot spilled out, so instead of changing the entire 12gals, they just topped it off?
Also, using TY22062 JD HY-GARD, I can't find any info on this to compare with the Super UDT-2. Is TY22062 fine to use/mix with UDT-2? I would'nt think so but you guys are the experts, it's just my first day, lol. Checking the level, the trans fluid is as clear as water so I can barley see it on the dipstick.
Thanks again all for the help!
Picked up a '14 L6060 from a John Deere dealer. Has about 600h on it. They gave me the services JD preformed and noticed that they used the following fluids from JD:
Qty: 2 TY22062 JD HY-GARD 2.5GAL
Qty: 1 TY26675 JD PLUS-50 II, 15w-40, 2.5GAL
The filters they used were all the Kubotas:
HH167-32430 - Engine Oil Filter
HHTA0-37710 - Hydraulic Filter
HHTA0-59900 - HST Filter
HH1J1-43172 - Fuel Filter
1G311-43380 - Separator
My concern is the fluids-
Engine Oil, Manual says SAE 15w-40... the TY26675 JD PLUS-50 II, 15w-40, 2.5GAL does not show SAE on the container, I can only assume this is fine though? Req. 9.9 qts, is a hair under 2.5gal so this must have been fully changed.
Trans Oil, First, it's showing 2 - 2.5gal... so 5gal worth. Manual says theres 11.9 gals to change out. So I can only assume that when they changed the Hydraulic Filter and the HST filter that a lot spilled out, so instead of changing the entire 12gals, they just topped it off?
Also, using TY22062 JD HY-GARD, I can't find any info on this to compare with the Super UDT-2. Is TY22062 fine to use/mix with UDT-2? I would'nt think so but you guys are the experts, it's just my first day, lol. Checking the level, the trans fluid is as clear as water so I can barley see it on the dipstick.
Thanks again all for the help!