Front work lights

[Louiedumps84]

Hey guys … new to the kubota world so any help is greatly appreciated. I recently picked up a L4060 LE to do some work around the property especially snow plowing . The only downside is the LE (although the it’s a full cab) has no outside work lights front or rear .
I recently installed a set of rear work lights which were simply plug and play .
are the fronts the same ?(I can’t seem to find any plugs where the lights should be)

any help is greatly appreciated!
Thank you

 

[Tractordoctor]

Hi do you already have the front light switch installed in the cab? Ususally the hidden plug in on kubota are cover with bleu electrical tape

 

[Louiedumps84]

Hi do you already have the front light switch installed in the cab? Ususally the hidden plug in on kubota are cover with bleu electrical tape

I didn’t know where to put the switch ? Lower part where other switches are or up top by the windshield wiper?

 

[johnsayen]

I didn’t know where to put the switch ? Lower part where other switches are or up top by the windshield wiper?

L6060 work light switches are on the lower right

 

[Tractordoctor]

Usually work light switch goes on right pillar there is two square in the pillar were the switch goes

 

[Louiedumps84]

L6060 work light switches are on the lower right

Do you know if the “pigtails” are up in the roof for the lights to plug into ?

 

[johnsayen]

Do you know if the “pigtails” are up in the roof for the lights to plug into ?

Sorry I don’t.

 

[Louiedumps84]

Usually work light switch goes on right pillar there is two square in the pillar were the switch goes

I know the rear work lights plug in to the pilar

 

[whitetiger]

Here are the installation instructions for the front work lights.

 

[Tractordoctor]

There u go I was looking for those instruction for u

 

[Louiedumps84]

Here are the installation instructions for the front work lights.

awesome.. thank you!

so i assume that second plug (in the pillar) was for those... very cool!

Thank you