If there are any Kubota engineers who follow this page please redesign the lifting lugs on both Mower Rear Links so that when the lugs wear out all you have to do is replace the lugs and not the whole link. Replacing the links is expensive and a lot of trouble.
Recommendation:
Instead of having the lugs integrally welded to the link, replace it with a short threaded stud with a washer and cotter pin. That way all one has to do is simply remove the stud and replace it with a new one. Sooo easy!
Recommendation:
Instead of having the lugs integrally welded to the link, replace it with a short threaded stud with a washer and cotter pin. That way all one has to do is simply remove the stud and replace it with a new one. Sooo easy!