BX25 Question about rear rim and slighly egged mounting holes.

Joe.G

New member

Equipment
BX25 W/601
Oct 13, 2024
25
9
3
NY
Hi, I just recently picked up a pretty clean BX 25 I believe it is a 2015. The previous owner did put new tires on and I noticed all of the rims were on the wrong way ( Spun around ) I got that corrected but I noticed one of the rear rims has 2 holes that are egged out and the other three appear fine. I remounted everything and torqued them to spec. What are your guys thoughts on this? The rims look new besides this issue.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,974
6,157
113
Sandpoint, ID
A picture of how bad they are might help, You could use a washer to allow it to hit all sides and stay tight.
 

Joe.G

New member

Equipment
BX25 W/601
Oct 13, 2024
25
9
3
NY
Yeah I figured that, I'll take it off when i get a chance. I think if I just keep an eye on it'll be okay, This machine isn't doing any big jobs.

I did add a washer to each, I used a softer washer that bent into the hole a little.
 
  • Like
Reactions: 1 user