Good evening all. I have just recently purchased BX2200D. I did some dirt work on the first outing and the hydraulics seemed a little weak. I have researched online on the shimming process. I can only find one fitting that looks like the right one. It is on the left side if standing behind the tractor looking forward. This is the model that the control lever comes off with the loader when the loader is dropped. I will have to remove a line from the front of the control valve to read pressure. I just want to verify that I am looking at the relieve valve to shim. I have circled the suspect part.
Thanks for the help.
Thanks for the help.
