J Joel White New member Equipment Kubota B7000 Jun 24, 2021 2 0 1 Lancaster, NH Jun 24, 2021 #1 I bought a used B7000 and it does not have a roll (safety) bar. Most pictures of B7000 do not have such a feature. Any ideas on how to get one?
I bought a used B7000 and it does not have a roll (safety) bar. Most pictures of B7000 do not have such a feature. Any ideas on how to get one?
R Russell King Well-known member Equipment L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop Jun 17, 2012 4,656 995 113 Austin, Texas Jun 24, 2021 #2 There is or was a program for older tractors on their website. You can search through this forum or on the Kubota site to see if you can find it. I recall seeing after market systems at Bare Co USA - Main Index www.bare-co.com Good luck
There is or was a program for older tractors on their website. You can search through this forum or on the Kubota site to see if you can find it. I recall seeing after market systems at Bare Co USA - Main Index www.bare-co.com Good luck
J Joel White New member Equipment Kubota B7000 Jun 24, 2021 2 0 1 Lancaster, NH Jun 25, 2021 #3 Russell King said: There is or was a program for older tractors on their website. You can search through this forum or on the Kubota site to see if you can find it. I recall seeing after market systems at Bare Co USA - Main Index www.bare-co.com Good luck Click to expand... Thanks Russell, I'll check both sites out.
Russell King said: There is or was a program for older tractors on their website. You can search through this forum or on the Kubota site to see if you can find it. I recall seeing after market systems at Bare Co USA - Main Index www.bare-co.com Good luck Click to expand... Thanks Russell, I'll check both sites out.
arto98607 Member Equipment Kubota F3060, Grasshopper 721D, Ford 1310, JD 440 ICD, JD 300 Aug 24, 2014 64 4 8 Southwest WA State Jun 25, 2021 #4 There are tractor salvage yards and it's worth checking out to see what they may have? No matter what, you will probably need access to welding and metal cutting equipment to make one fit.
There are tractor salvage yards and it's worth checking out to see what they may have? No matter what, you will probably need access to welding and metal cutting equipment to make one fit.