360/70r20 pressure on M7060

bkandor

New member

Equipment
M7060 (new), B8200 (very old)
Jun 26, 2021
7
1
3
ontario
Hi,
Just took delivery of M7060, the front tires are 360/70r20. The manual doesn’t list this tire for pressure.

They came with about 22psi in them but they look way too soft to me (side wall flexing) when driving and using fel. The only reference I found show Max old at max pressure of 4300lbs at 35 psi.

What is a good pressure for this tire size?

thanks!
 

kubotafreak

Well-known member

Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Sep 20, 2018
1,019
372
83
Arkansas, US
Front tires are usually set close to max tire(as cast into the sidewall) rating on machines with loaders. The rear is dependent on load.
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,273
2,105
113
Bedford - VA
Pressure is a property based on application!
Obviously - FEL work will need more PSI than mower work.
And too much pressure makes for a rough ride.

I would say bump that up a bit - 25-27 and see how you like it