B2650 Rear remote Hydraulic tilt

F

Fluke631

Member
Lifetime Member

Equipment
B2650
Oct 29, 2019
70
5
8
Canada
After reading online about hydraulic systems, I assume that my backhoe is the last item in the loop (only one line coming out of it) so it goes to the tank.

So when my backhoe is not on tractor my valve power beyond will go on that return line. I read the return lines were only low pressure. Am I going to break something by hooking up my power beyond to the return line?

Thanks
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,605
5,066
113
Sandpoint, ID
Fluke631 said:
After reading online about hydraulic systems, I assume that my backhoe is the last item in the loop (only one line coming out of it) so it goes to the tank.

So when my backhoe is not on tractor my valve power beyond will go on that return line. I read the return lines were only low pressure. Am I going to break something by hooking up my power beyond to the return line?

Thanks
Click to expand...
Negative, the BH is a PB loop not a tank/ return line, it's completely differnt.
 
You must log in or register to reply here.

Top Bottom