G1900 fabrication

Since I wanted a real tractor and couldn't afford one being a new home owner, I built quite a few things for my G1900 HST.

First we have is the rear hitch. Took some scrap 1/2 steel plate and some scrap 2 1/2" box tube... Not as fancy as a 3 point setup (which I will do someday) but it works

I also fabbed up a rear ballast box from a scrap hvac blower motor. I'm going to weld a 2" tube on it and stack the 10- 25lb Olympic weights that I got for free from work.

I bought a B2750 front plow for it off of craigslist for 150 bucks and needed a way to mount it. A buddy had an old hitch for a ford ranger laying around so I cut it up and made it work...

I also made a set of snow chains from bulk twisted chain that I got for 80% off from a closing sears hardware. I have about 23 bucks in the chains and tighteners. I have never used tire chains before so idk if they will work until the snow flies!

I still have to fab up the reciever style mount for the plow

since no tractor is complete with an exhaust stack....I had a 2" J bend laying in my stash of fab parts. I took a piece of 3/8" steel and made a three bolt flange. I cut it out with a plasma cutter and welded it all together.