New B2601 wiring

Ditchdigger54

New member

Equipment
B2601 FEL, Box Blade, snow plow, Home made Balast box
Dec 10, 2019
12
2
0
Southbury, Connecticut
Hi everyone, a new owner/member here
I’m thinking of adding work lights to my B2601. I’ve read that there is a prewired, from the factory connection underneath by the brake lights somewhere. Can anyone tell me which side it is on? Better yet, show me a picture of it’s location?
Somewhere I read it is fused for 5 amps, is this correct? It doesn’t sound like much.
I’m not looking to light up a runway, but would like to be able to see the length of my driveway ( about 200’ long ).
Anyone have any side mirror suggestions?
Thanks in advance!
Ditchdigger54
 

Roadworthy

Well-known member
Lifetime Member

Equipment
L2501 HST
Aug 17, 2019
1,649
525
113
Benton City, WA
My L2501 has a fuse clearly designated on the fuse box for a work light. In this case it is a ten amp fuse. When you locate your connector you may have difficulty locating a mating connector for it short of the Kubota dealer. I'm running a separate lighting circuit for add on lights and accessories.
 

Steve67

Active member

Equipment
B2601-fel, 60"mmm, 5' rear blade, balast box
Jan 20, 2017
322
101
43
St. Louis, mo.
It’s under the right rear fender, it has a connector for plug and play. Good luck.