What causes this?

billrigsby

Active member

Equipment
L1500DT Too many implements, or is there such a thing?
Mar 17, 2015
994
134
43
Florissant CO USA 8213'
www.facebook.com
Curious what causes this in a post, I see it from time to time......


I***8217;m wondering if someone has any reliable sources to research engine fitment. I***8217;d like to compare dimensions between different engine models including rear flywheel mounting configuration and bell housing mounting dimensions.

I***8217;m considering an engine swap on my B7100 and I***8217;ve seen multiple times that the only options are 750, 850, and 950. My intention is to find exact specs and determine why that is. If I want to choose an engine other than one of those, I need to know exactly what mods will need to be made in order to do the swap.

Engines I***8217;m strongly considering are 905 or 1105.

Thanks in advance.
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,854
3,101
113
Wind Gap, PA
it's the code used for an apostrophe. I believe it only comes up when people are using taptalk.
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
546
83
USA
That is correct and in as much as I don't use it, you won't see it in any of my posts.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,851
113
Sandpoint, ID
Curious what causes this in a post, I see it from time to time......


I***8217;m wondering if someone has any reliable sources to research engine fitment. I***8217;d like to compare dimensions between different engine models including rear flywheel mounting configuration and bell housing mounting dimensions.

I***8217;m considering an engine swap on my B7100 and I***8217;ve seen multiple times that the only options are 750, 850, and 950. My intention is to find exact specs and determine why that is. If I want to choose an engine other than one of those, I need to know exactly what mods will need to be made in order to do the swap.

Engines I***8217;m strongly considering are 905 or 1105.

Thanks in advance.
There are many variables to why a D650, D750, D850, D950 will work and others will not.
Flywheel and bell housing mounting is the least of your concerns, but will be most likely different.

Clutch plate alignment is an issue, as even something like 1/8" difference and the clutch plate will not release.

Oil pan is the number one concern as most will not clear the front propeller shaft.

Some other major issues are the hydraulic pump drive.
The water pump and fan drive (most stick out further)
The charging system
Oil filter placement.


And that's just a few of the issues.
 
Last edited: