B6000 hydraulic problem

Xyroryx

New member
Sep 15, 2019
1
0
1
Inchenhofen
hello,

I am owner of a b6000 since yesterday.
my problem is that the rear hydraulics can be raised and lowered, only it drops slowly.
all hydraulic lines are dry.

what could be the problem?

Michael
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,107
926
113
Williamstown Ontario Canada
You need to realize that the 3 pt hitch is powered by a single acting cylinder.

Hydraulic pressure lifts the arms but gravity lowers them. If there is no implement on the rear hitch then the arms will go down slowly.

Dave
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
There is also a drop speed adjustment.
Go to kubotabooks.com and download both the operators manual and the service manual. ;)