Need Radiator and turn buckles for Zen-noh L1801DT

tdnp

New member

Equipment
L1801 DT
Aug 10, 2010
23
0
0
Kansas
I need to see if anyone knows where I can get a radiator.

I also need the turn buckles for the 3 point arms.

Zen-noh L1801DT

Any information is appreciated.
 

Russell King

Well-known member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
4,603
975
113
Austin, Texas
You might try this salvage yard

http://wkytpstore.com/

The turnbuckles could be cobbled together with parts from the hardware store.

You may also try to find out what (non gray) tractor is similar to the L1805 by asking. I do not know but it may be a L185, L225, L345 or something in that line (the L175 is equivalent to the L1501 I think) . Generally posting a picture of your tractor can narrow it down quickly.

Once you know that you can get the part numbers from the Kubota website parts manual.
 

hodge

Well-known member
Lifetime Member

Equipment
John Deere 790 John Deere 310 backhoe Bobcat 743
Nov 19, 2010
2,849
367
83
Love, VA
You might try this salvage yard

http://wkytpstore.com/

The turnbuckles could be cobbled together with parts from the hardware store.

You may also try to find out what (non gray) tractor is similar to the L1805 by asking. I do not know but it may be a L185, L225, L345 or something in that line (the L175 is equivalent to the L1501 I think) . Generally posting a picture of your tractor can narrow it down quickly.

Once you know that you can get the part numbers from the Kubota website parts manual.
The parts sold at a hardware store are not nearly heavy enough to do the job of turnbuckles- you can buy them on ebay or from places like Weavers, or I can build you custom telescoping stabilizers. But, believe me- I've made them for many customers who attempted to use fencing/hardware for turnbuckles. They just aren't heavy enough.
 

lsmurphy

Active member

Equipment
B7001
Oct 19, 2012
1,197
5
36
Parrrottsville TN
http://www.ebay.com/itm/like/230675210284?lpid=82

Is the above correct? pics always helps.


If the tanks are good you can send yours out to be rebuilt........may cost $250 or so plus shipping.

Or you have have one built custom for about $400++......aluminum.........there are many custom builders..............look to........search hot rodders sites.
 
Last edited:

tdnp

New member

Equipment
L1801 DT
Aug 10, 2010
23
0
0
Kansas
Thanks for the information. For some reason I did not think of EBay. I spend all my money on Craigslist :D

I will attempt to make my own. Thanks again.