Looking For - Upper 3pt Lifting Rod Pins - B7200HST

ttj49

ttj49

New member

Equipment
B6100-DT
Jan 15, 2014
99
0
0
South Central Kentucky
www.solidaluminumcane.com
I'm looking for the upper lifting rod pins for a B7200HST. The rod holes on the lift arms are 1/2 inch on both R and L rods to accept a 1/2 inch threaded end, but the right pin hole on the right rod is 3/4 inch and the left pin hole on the left rod is 5/8 inch. I actually only need the left pin - 1/2" threaded end / 5/8 inch pin end. I can't find anything on line with a 1/2 inch threaded end. Don't want to pay Kubota 40 bucks for one pin. Any suggestions would be appreciated. Thanks.
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,597
5,056
113
Sandpoint, ID
OK you need to find a better parts supplier!;)
Your turnbuckle your price $114 my price $24.72
Three point top link side pin you price, $40 my price $13.49
and yes these are Genuine Kubota parts!

Try going to: http://www.goldeneagledirect.com/index.php

If you don't have the parts manual, I think it's also on kubotabooks.com
if not go to Kubota.com, parts (on top), illustrated parts (on the side) then put in your Model # and get the parts diagrams and part #'s.
 
ttj49

ttj49

New member

Equipment
B6100-DT
Jan 15, 2014
99
0
0
South Central Kentucky
www.solidaluminumcane.com
Hey, thanks for the link. I'll check it out. I discovered today the left lift rod is supposed to have the same 3/4 inch diameter hole as the right rod. A previous owner, for some strange reason inserted a bushing into the ball swivel hole to reduce it to 5/8. I couldn't tell due to wear, but darned if there wasn't a bushing in there, so problem solved, removed the bushing and actually found the pins here at this site for 6.95 each, plus 8 bucks shipping. Now lets see if they hold up.

http://www.stevenstractor.com/acces...ift-arms-related-parts/pins-bushings.html?p=1
 
lsmurphy

lsmurphy

Active member

Equipment
B7001
Oct 19, 2012
1,197
5
36
Parrrottsville TN
You must log in or register to reply here.

Top Bottom