L3710 Bulb Replacements (LED/HID?)

Hi all-

I've got a L3710 that I'd like to put some new headlamp bulbs in before winter takes a giant white dump on me. I took the bulbs out but can find no identifying numbers. I search online and found Kubota part numbers - but nothing I can use to point in the direction of a replacement.

I did get this site (www.superbrightleds.com) from one of the thread on here, but none of the "base types" are anything like mine. I'm guessing I have to cut the wires and do some splicing. BUT before I go all freddy krueger on the wires, I wanted to get your input.

1. Is there a direct LED/HID replacement (not incandescent)?
2. Do I have to cut the wires and splice in the new bulbs?
3. If so, the base needs to match up, so what base do I select?

Thanks for your help.

Have a great week.

boozaro

North Idaho Wolfman said:

There are so many different versions of the bulbs that kubota has used over the years.
Post up a picture of which ones you have and we can see if there is a good replacement for it.

Click to expand...

Here's the bulb - on the bottom there are (2) raised contacts. There's also a small tab around the collar that isn't pictured. Based upon Firefighterontheside's reply - it looks like the base is PX15D or H6M. They appear to be the same. Thanks, Wolfman.

If anyone has a bulb they recommend or don't recommend, that would be great. I am reading reviews online (mostly Amazon), and they aren't really conclusive. So anyone with personal experience would be great.

Thanks again gents.

Firefighterontheside said:

These should work. There is even a review that they worked great in a Kubota L series.
https://www.amazon.com/dp/B00XIE8TOE?tag=viglink20660-20

Click to expand...

Thanks, FFOTS. I prefer the hi-lo, but your link did give me a clue to the base type. So that's huge. Thanks. At least now I know what type of bulbs to look at. Now just to find an LED that will work well - and not quit after the first week. Seems like a lot of those out there.

Thanks again.

200mph said:

Not certain if it matters to the OP, but the description states they are low beam only.

Suggest sticking with LED over HID to keep the current draw to a minimum.

Have you considered adding auxiliary LED lights to the ROPS? Most find the stock headlight position limiting when a FEL is mounted.

Click to expand...

Definitely want a hi/lo. And thanks for the advice on the LED. That narrows the search.

I've got the original work lights on the cab. But I purchased LED replacements last year. I just need to wire them up. Seems like there's always something a little more pressing that keeps me from doing it. If I wait too long, the tech will probably change. I hope to have those up and working by first snow. But I'd like to have the lower headlights a little brighter too.

Thanks again for the advice.