brosenbaum
New member
Equipment
L3400 HST, FEL, box blade, rear blade, bush hog, tiller, post hole digger
Have a 2008 Kubota L3400 HST, with 2540 FEL. Want to install a hydraulic cylinder for tilt control of 3 point hitch- want better control of box blade and/or rear blade for dirt work.
Need help on several things:
Looking for a supplier for cylinder, valve module & hoses. Also any suggestion of size & stroke and where to tap into the supply & return lines.
Also where can I purchase/download a shop manual for tractor, and especially a hydraulic schematic for the 2540’s control module?
I am toying with using temporary connections to FNL bucket tilt up/down lines (have self –sealing QD connections so bucket tilt should hold steady for all day blade work).
Thanks all
Need help on several things:
Looking for a supplier for cylinder, valve module & hoses. Also any suggestion of size & stroke and where to tap into the supply & return lines.
Also where can I purchase/download a shop manual for tractor, and especially a hydraulic schematic for the 2540’s control module?
I am toying with using temporary connections to FNL bucket tilt up/down lines (have self –sealing QD connections so bucket tilt should hold steady for all day blade work).
Thanks all