Help, box blade width for on B2650 w/cab

Dogbone921 · Sep 10, 2019

I was wondering that size box blade a B2650 can handle, the dealer suggested to 5' because the front bucket is 60".

What are your thoughts? Any help is appreciated. Thanks.

skeets · Sep 10, 2019

You can always go bigger, but that doesn't mean you should just because it fits doesn't mean it will work like you want it to. A lot of guys for with a 72 inch and even 84 inch rear blade, size isnt every thing sometimes look through the list here and see what you need,

https://www.kubotausa.com/docs/default-source/lp-pdfs/02-b-series-lp-implements.pdf

pauly · Sep 10, 2019

I have the 2650B open station and run the 60” implements. Rear blade, box scraper, land plane. Went with the heavier versions. Good rule of thumb is to be wider than your rear wheel width.

js5020 · Sep 10, 2019

I'd stick with a 60. A 500 lb box blade full of dirt can be a tough pull with a 26 hp 2000 lb machine.

dirtydeed · Sep 10, 2019

I have a 60" EA box blade behind mine. It's plenty wide enough. I'd suggest sticking with the 5 footer for the B2650 as well.

Dogbone921 · Sep 10, 2019

skeets, thanks for the link, I haven't seen this chart.

RonBoyBX25D · Sep 10, 2019

I would also recommend the 60***8221;, go with a heavier version for cutting. The t0 is wider than the tires even with 2***8221; spacers installed.

skeets · Sep 11, 2019

One thing you have to remember, you will run out of traction long before you run out of power. Remember these are small tractors and not a 988

shootem604 · Sep 11, 2019

Rule of thumb is generally 1 foot of implement width per 5hp.

Missouribound · Sep 18, 2019

shootem604 said:
Rule of thumb is generally 1 foot of implement width per 5hp.

I have never heard of that but it makes perfect sense.
No reason to overthink things.

RTMach1 · Sep 20, 2019

I run a 54" Land Pride box for my B2650 rops tractor. I already had it for use with my old B2400. With a substantial amount of dirt collected in the box it will stop the B2650 due to wheel spin even with R4s and rear tires loaded. It does cover the tire tracks but just barely. A 60" will work but the B2650 wont "own it".

sheepfarmer · Sep 20, 2019

Owners manual for the B2650 says not more than 54 inches or 500 lbs for a box blade. Exceeding that will void warranty. It is not just the engine hp but also the strength of the 3pt and the subframes that limit implement width. And as mentioned above the weight and traction. No point in having a really wide implement if you're just going to get it stuck or be unable to make it work properly.

Freeheeler · Sep 20, 2019

I run the 60" EA box and haven't had any issues. Digging heavy into a 30 y/o compacted gravel driveway I had no issues with power or traction. I'm on filled turfs. I don't know about the warranty, but I can't see it breaking stuff before it looses traction.

Search

Help, box blade width for on B2650 w/cab

Dogbone921

New member

skeets

Well-known member

pauly

Member

js5020

Member

dirtydeed

Well-known member

Dogbone921

New member

RonBoyBX25D

Member

skeets

Well-known member

shootem604

Member

Missouribound

Active member

RTMach1

New member

sheepfarmer

Well-known member

Freeheeler

Well-known member