Can't find parts for my B6000 steering box, need new one. my sector shaft is shot. Help, don't want to put the old girl out to pasture.
wanted steering box for B6000
- Thread starter retiredFF
- Start date
I'm assuming you checked with dealer?
I had to rebuild mine this past summer and the dealer by me was able to get everything but the drag link (NLA). I was able to get sector shaft, bearings, shims, seals, assembly nut ball (includes steering shaft). The sector shaft wasn't bad, but figured I would replace it since everything else inside was new.
I had to rebuild mine this past summer and the dealer by me was able to get everything but the drag link (NLA). I was able to get sector shaft, bearings, shims, seals, assembly nut ball (includes steering shaft). The sector shaft wasn't bad, but figured I would replace it since everything else inside was new.
RetiredFF
Tried PMing pics of my old sector shaft but it would not let me. So I am attaching here. If you want PM me your address & I will send out.
Tried PMing pics of my old sector shaft but it would not let me. So I am attaching here. If you want PM me your address & I will send out.
Attachments
I see you got back to me quick, thanks. wish I would have seen your post before I bought a rebuilt one for 650.
MZ73 Just joined. I have a 1973 B6000 that is in need of a steering box. I see one advertised on ebay. Wonder how hard it is to pull the old one and replace myself.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more