Go Back   OrangeTractorTalks - Everything Kubota > Kubota Talk > Tractor Operating

Tractor Operating Wondering what that strange lever does, how to safely hill climb or get into 4WD? Discover and share how to get the most out of your tractor.

Reply
 
Thread Tools Display Modes
Old 3 Weeks Ago   #1
PA452
2nd Yr. Apprentice
 
Join Date: Nov 2015
Location: Western PA
Equipment: B2650
Posts: 206
Default New B2650 arrived, thanks all (pics)

I've been posting question after question for months now. Buying phase is done, my B2650 arrived Friday. Thanks to all who helped over the summer and probably spring too.

Coming from the BX23, the loader and backhoe are much nicer, and as a mower I think I'm going to miss the BX, as I suspected would happen.

Went with the B2650HSD ROPS with B77 backhoe, 60" MMM, FEL with 60" bucket and Land Pride forks.

Here it is on arrival. Driver called me and said he didn't want to bring the trailer up the driveway, which I expected. Walked down and met him by the road. He unloaded right on the road which was a bold choice, given he was on a blind turn. Once I was there, I was able to flag down traffic (of which there was none anyway), but prior to that, a little risky.





Here it is as delivered.






Last edited by PA452; 3 Weeks Ago at 06:23 PM.
PA452 is offline   Reply With Quote
Sponsored Links  
Advertisement
Old 3 Weeks Ago   #2
m.t.hands
1st Yr. Apprentice
 
Join Date: Jul 2015
Location: NE Bama
Equipment: L 5030 and BX2200
Posts: 73
Default Re: New B2650 arrived, thanks all (pics)

very nice
m.t.hands is online now   Reply With Quote
Old 3 Weeks Ago   #3
bird dogger

2nd Yr. Apprentice
 
Join Date: Feb 2019
Location: North Dakota
Equipment: Kubota B2650 and lots of other equipment
Posts: 143
Default Re: New B2650 arrived, thanks all (pics)

That looks super NICE!!

Surprised the driver just didn't pull off the road into your driveway a little bit to off load. Looks like an easy back up out onto the main road again, especially with you there to flag down traffic for him! Glad it went well. You're soon gonna love your new setup!!
__________________
That old adage that states "If you want something done right you must do it yourself!", didn't quite hold true regarding my latest surgery.
bird dogger is offline   Reply With Quote
Old 3 Weeks Ago   #4
RonBoyBX25D

3rd Yr. Apprentice
 
Join Date: Aug 2015
Location: Minneapolis, MN
Equipment: B2650, LP Grapple, Bro-Tek spacers, QH, Box Blade, Landscape Rake, RB, and 1560G
Posts: 451
Default Re: New B2650 arrived, thanks all (pics)

Very Nice! I have the same setup minus the BH. Had mine for a couple months, still havenít missed the BH...sure I will at some point in the near future.

Have fun and enjoy the work
RonBoyBX25D is offline   Reply With Quote
Old 3 Weeks Ago   #5
twomany
3rd Yr. Apprentice
 
Join Date: Jul 2017
Location: Vermont
Equipment: B7200
Posts: 429
Default Re: New B2650 arrived, thanks all (pics)

Just like the one at the dealer's lot!

Put it to work, get it dirty

THEN post pictures.
twomany is offline   Reply With Quote
Old 3 Weeks Ago   #6
mpham
2nd Yr. Apprentice
 
mpham's Avatar
 
Join Date: Nov 2016
Location: Massachusetts
Equipment: B 2650 cab
Posts: 144
Default Re: New B2650 arrived, thanks all (pics)

Nice! I love what these machines can do. Hope you get lots of use out of it.
mpham is offline   Reply With Quote
Old 3 Weeks Ago   #7
RLinNH
1st Yr. Apprentice
 
Join Date: Mar 2018
Location: NH
Equipment: B2650,LA534,BH77
Posts: 52
Default Re: New B2650 arrived, thanks all (pics)

Good choice.
RLinNH is offline   Reply With Quote
Old 3 Weeks Ago   #8
dirtydeed

4th Yr. Apprentice
 
Join Date: Dec 2017
Location: Wind Gap, PA
Equipment: B2650 BH77, 2006 BX23TLB, Forks, Box blade, rear blade, flail mower
Posts: 758
Default Re: New B2650 arrived, thanks all (pics)

Congrats PA. I know you'll enjoy it.

Putting mine to work today as well.
dirtydeed is offline   Reply With Quote
Old 3 Weeks Ago   #9
troverman
4th Yr. Apprentice
 
Join Date: Jun 2015
Location: NH
Equipment: 2019 L2501 HST, 2018 MX4800 HST, 2013 B2920 HST (Traded), 2002 L4310 GST (Sold)
Posts: 585
Default Re: New B2650 arrived, thanks all (pics)

Very nice machine. I'd like to see a pic of the digital instrument cluster with the engine running.

I'd recommend installing some LED worklights facing forward and backward.
troverman is offline   Reply With Quote
Old 3 Weeks Ago   #10
SMKK
1st Yr. Apprentice
 
Join Date: Aug 2019
Location: Lachine, QC
Equipment: B2650
Posts: 36
Default Re: New B2650 arrived, thanks all (pics)

Congrats on your new machine looks good. I am sure you will enjoy it!
I look forward to comparing notes!
SMKK is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.