L4200DT strange noise coming out of pump line lift not working, as title stated, I bought it know it had a bad clutch, not the lift Is not working, make a noise an it coming out of this like a as I. Pic
L4200DT strange noise coming out of pump line lift not working
- Thread starter ASTER
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Normally noise out of the pump and something not working means that the pump is cavitating and not moving fluid.
Suction leak, line issue, or possibly pump issue.
Suction leak, line issue, or possibly pump issue.
im waiting for my wsm to come, can you tell me what port to test pressure at....
, i think i might of got over my head with the l4200dt.....
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Should have asked me I would have given you a copy of the WSM.im waiting for my wsm to come, can you tell me what port to test pressure at....
Just crack a pressure line, you'll have flow or you won't, pressure is not the issue.
Should have asked me I would have given you a copy of the WSM.
Just crack a pressure line, you'll have flow or you won't, pressure is not the issue.
can you shoot me a copy
VERY LITTLE COMEING OUT... BUT POWER STEERING WORKS GOOD, ALSO PTO IS VERY SLOW.. an some times i click it over it dosnt even come onShould have asked me I would have given you a copy of the WSM.
Just crack a pressure line, you'll have flow or you won't, pressure is not the issue.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Try again with the description of what information you're looking for please, maybe with less coffee or more sleep.
Try again with the description of what information you're looking for please, maybe with less coffee or more sleep.
lol.... i know there are two valves on top of the pump... i mean two screws.i think its something to do with ps, btw order a used hydro pump from wangers, im fire it up after i put this red kote sealer in the tank