Sears Mouldboard convertion HELP

B

briantia1968

New member
Aug 19, 2015
6
0
0
US
I don't have the pictures I did the same thing you are trying to do I looked on craigs list I found a picture and fabrcated it from the picture used 2inch it turned out nice but still wasent heavy enough for hard ground then stuck a engine block in top for weight it worked. then another opstcal was getting the plow to track the rear tire in just the right place and getting rear wheel adjusted goodluck

Sent from my SCH-S968C using Tapatalk
 
Last edited by a moderator:
en_teng

en_teng

Member

Equipment
B7001
Aug 13, 2013
39
0
6
Pacific Islander
briantia1968 said:
I don't have the pictures I did the same thing you are trying to do I looked on creggs list I found a picture and fabrcated it from the picture used 2inch it turned out nice but still wasent heavy enough for hard ground then stuck a engine block in top for weight it worked. then another opstcal was getting the plow to track the rear tire in just the right place and getting rear wheel adjusted goodluck

Sent from my SCH-S968C using Tapatalk
Click to expand...
the hardest part was bending without bender.. 100% old american steel
 

Attachments

Last edited:
en_teng

en_teng

Member

Equipment
B7001
Aug 13, 2013
39
0
6
Pacific Islander
north idaho wolfman,skeets,tiredguy,briantia1968,coachgeo THANKS..



(@ admin please put a thanks button on our vbulletin)






Please advise me does my plow correctly working please check photo thank you pardon my ignorance..:D
 

Attachments

skeets

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,141
2,790
113
SW Pa
I do believe that you maybe onto something there my friend,, outstanding job :D
 
You must log in or register to reply here.

Top Bottom