Needing to put tires on a new to me L2250DT. Looked at the specs. did some digging, looked at what is on the machine, read a lot online (OTT) and have narrowed my issues to these:
1. specs call for 9.5-24 (r) and 6-14 (f)
2. someone put 11.2-24 on rear and left 6-14 on front before I bought it.
3. 4wd seems ok as the ratio isn't too far off but it can't stay like this.
4. better tire selections if I keep the 11.2-24 on rear and look at 6.00-14 tires.
5. Does the 6.00-14 and the spec'd 6-14 fit on the same wheel/rim?
6. Looking at the BKT or Deestone D402 as front tire options. They both give the 0.67 front to rear ratio.
7. Would like more of an industrial tread and less AG if anyone has suggestions.
8. I've contacted Kubota regarding the final drive ratio and will post it if they respond. KUBOTA REPLIED!! 1.688 drive ratio.
9. Looking a FEL if anyone knows of one (BF400G as spec'd). Any loader for 27-30 HP may do.
Thanks
1. specs call for 9.5-24 (r) and 6-14 (f)
2. someone put 11.2-24 on rear and left 6-14 on front before I bought it.
3. 4wd seems ok as the ratio isn't too far off but it can't stay like this.
4. better tire selections if I keep the 11.2-24 on rear and look at 6.00-14 tires.
5. Does the 6.00-14 and the spec'd 6-14 fit on the same wheel/rim?
6. Looking at the BKT or Deestone D402 as front tire options. They both give the 0.67 front to rear ratio.
7. Would like more of an industrial tread and less AG if anyone has suggestions.
8. I've contacted Kubota regarding the final drive ratio and will post it if they respond. KUBOTA REPLIED!! 1.688 drive ratio.
9. Looking a FEL if anyone knows of one (BF400G as spec'd). Any loader for 27-30 HP may do.
Thanks
Last edited: