VERY slow getting onto threads

Mr. K

Administrator
Staff member
Feb 14, 2009
522
138
43
www.orangetractortalks.com
Ok sounds like we are on the right track here. I'm going to leave things as-is and give these settings more time to soak on the site - a few days. If you see any slowdowns, let me know when/where/how and we can continue to dig in. If not, we may have got it with these current settings.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,513
657
113
New Hampshire
Mr K must have figured out how to rip out all emissions crap that was slowing the site down and installed a turbo in it’s place
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
I've been in the high country with a tablet for 3 days and no slow down or refusal to load problems, but that unread thread thing is still going on. Checked the service , repair, & maintenance thread this morning, and a few minutes ago, it showed 3 pages of unread threads in that section.
 

sheepfarmer

Well-known member
Lifetime Member

Equipment
L3560, B2650, Gator, Ingersoll mower
Nov 14, 2014
4,440
654
113
MidMichigan
I've been in the high country with a tablet for 3 days and no slow down or refusal to load problems, but that unread thread thing is still going on. Checked the service , repair, & maintenance thread this morning, and a few minutes ago, it showed 3 pages of unread threads in that section.
You have to click quick links, then choose mark forums as read to get rid of the ones you don't want to read otherwise it just keeps getting longer.
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,259
2,203
113
Peoria, AZ
You have to click quick links, then choose mark forums as read to get rid of the ones you don't want to read otherwise it just keeps getting longer.
I do that every day, and it still gets longer. And we never had to do that in the past.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Yes there is something wrong with the Unmarked threads, I know because I read them, and they still come back as unread. :confused: