Search results

How do you remove the cylinder cap to replace the seals? I want to do it myself but I can't remove the cap!! I have an L2250.

How to remove the cap to replace seals on a hydraulic cylinder in an L2250? Already tried this . Thanks!

The tractor still running fine, but I have a problem with the clutch... will take one or two minutes before the clutch will engage... adjusted the pedal but the problem still happens...needs to run one or two minutes before the transmission will work (will not engage in any gear or make grinding...

Success!!!, finally my tractor is working again !!. Yesterday I installed the pump, bleed lines and the tractor started almost immediately. After a long time, it is good to have my Kubota again. Now I have to replace the seals on the front axle. Thanks for all the help the members gave me. I...

Before I did the tank, I mixed in a very small amount to see the reaction and let it sit for a couple of days. When I notice that it was safe I applied to the tank. It works!!

Well after several phone calls(Fuel and radiators cleaning shops, Kubota, etc) I decided to try my "solution" for cleaning the fuel tank. I used a can of oven cleaner foam(sprayed first in the tank), Pine-Sol(1/2 of the bottle)Dawn detergent(1/4 cup )Purple Power cleaner(1 cup), and about 2...

Bio-Kleen Bio Kleen Biocide, 16 oz. This one?

After $529 dollars my injection pump is back!! Took it to a shop in Orlando, Fl and they rebuilt it. Now, I removed the fuel tank to clean it and I found a black stuff very sticky...tried to remove it with the pressure washer but no luck!! Any advice on how to clean a plastic fuel tank???

How to remove the fuel tank gunk.? Yesterday I removed the fuel tank from my L2250 in order to clean it... I found black sludge stuff, sticky as hell! Tried some soap and water(set all night) but ...this gunk is the "Devil honey!!"...will stick to my pressure washer gun... anybody knows what...

Ok, finally I got the last part (o ring) to put this head cylinder back together...does anybody knows the torque number for an L2250 Cylinder Head? Thanks.

Wolfman, there is a covered nut in the back (facing the rear of the tractor)of the injection pump, that has a little spring inside...should be remove before pulling the pump out?. Thanks, Daniel.

Thanks Wolfman, I will do that.

Cylinder head and block cleaned. Should I clean the holes before a place the new pencil injectors? If yes....How? Thanks, Daniel.

I'm thinking to reuse the head gasket(it's in good shape)but I noticed that who removed it before used black RTV...should I apply RTV??. Also, does somebody know torque specification for the Kubota L2250 head cylinder? Thanks, Daniel

Well, the last injector is out!! The damn thing broke on me and I have to remove the head cylinder to get the broken piece but is done...

D2Cat, when you said good injectors....which ones should I get? I found some in Total Tractors for $41...problably Chinese, also I will replace de glow plugs(Wolfman advise)...I found those ones for $14 each. I will be replacing both. Thanks, Daniel PS also I plan to use anti-seize for sure this...

Worked all morning...got two out!! the last one, son of the b#%#!!. Tomorrow I will do it!! Looks good D2cat...I prefer not to spend the money in a tool I never will use again...

Having a hard time removing the pencil injectors!!! I will need the injector extractor tool...sprayed PB blaster for two days, but nothing...any suggestion? Thanks, Daniel.

Wolfman, before I contact the mechanic, I called the rebuild shop in Orlando, Fl(Nozzle Master, been in business for more than 30 years) and the person there, quoted me that rebuilding a pump started at $350 to $700( depending on the work needed) after that, I called the mechanic shop and he...

Yes, I tracked fuel to out hose of lift pump(I even replaced the lift pump) I opened the bleeding valve, removed the little hose and when cranked was fuel coming, but nothing(very, very little)from injection pump.