Search results

I have installed this white filter on top of Primary filter on 473.2 hrs. and today I took it out and put new one in and took a picture of old one. Today's engine hour was 489.2 hrs. so after only 16 hours of running and that filter got so dark... :eek: Is anyone noticed on your air filter...

http://www.instructables.com/id/Homemade-Spot-Welder/step1/The-transformer-core/?images#images http://www.youtube.com/watch?v=9spgDiU3_nw It sounds a bit stupid in this forum but since I've learned a quite a bit of MIG weld from internet and this forum...! so I thought it would be a kind of...

One of youtube video guy said we could use Paint ball's CO2 canister for MIG welding. Is it true? I'm studying MIG welding a lot right now. but this Paint balling CO2 canister makes me quite interested. 'cause, I have 3 of 20 oz tank with full of CO2 right now. :D Is there any one using...

6' Snow blade earned 2 wings now and I do really love it. I was working on this Wings for a while but had a few incidents...:o A couple days ago, I finished all the mechanical work done on this wings. but electrical work hasn't done. 'cause, I couldn't find right wires for it. and I had to...

I have a 6' snow blade that attached on the bucket of FEL. and I use that snow blade to cleaning snow in my store parking lot. When I pushing snow, it always leaves windrow on both end. so I wanted to add wing on each side. I'm thinking about a foot long and a foot high on each side and try to...

One of my friend told me to try 960 RPM on PTO for 4' LAZY snow blower~!:rolleyes: I had a chance today to try 960 RPM and OH MY GOD~~~!!! I think it throws snow 50 to 60 feet away easily on 1500 engine RPM.:eek::eek::eek: With 540 RPM on PTO will throw snow maybe 20 feet, If I'm lucky. If...

I was going to install the horn (Using 12 volt siren:D) today on my tractor. So, I was looking for the place to installl that Siren. But Guess what I found~~~!!! Left hand Top side loader PIN was came out loolse almost half of it.:eek::eek::eek: My heart was almost stopped~!:eek: One good...

I have around 3" nut to loose on my 4' snow blower. I used 18" long pipe wrench too but can't loose them. I even used "Realese all" spray too but... One 18" pipe wrench to grab the shaft, the other 18" pipe wrench to grab the nut to loose....... but no luck yet. Please, give me a magic...

One of my neighbor checked and called Kubota dealer and said, "while press down the clutch and check Propeller shaft and see if it could be stopped by hand. if it is so, it is okay". And I did and it stopped by hand. but question is Why is it constantly running even though clutch is...

With my B7510DT, I haven't snow plowed yet~:cool: but when I had Zetor 70 Hp diesel tractor with 8' snow blower, I had problem with snow blower even with a double clutch. When I push clutch down to stop while snow blowing, snow blower always stuck with snow. Some how, PTO stopped and then...

Well, manual says I supposed to warm up the engine for 5 to 10 minutes before use the tractor in Winter. and I keep my tractor inside of the garage. and running the tractor inside for 10 minutes could be disaster. so I'm trying to get some temporary extension muffler to blow outside. Do you...

Here are pics of my 6' snow blade that modified to make quick attach to the Fron end loader bucket. I need snow blower and snow blade and bucket for sure to clean snow. Now I have it all. and I could take snow blade on and off less than 30 seconds...:D and I could changed all the angle I want...

Does anyone knows about the engine block heater? Wattages? I just bought digital timer and says, Resistive 1000W Tungsten 575W. 125V 8A. I'm sure engine block heater is "Tungsten" but I don't know how many watts it consumes~ My tractor is B7510DT~! Thanks for any input. and finally, HAPPY...

My B7510DT has 444 hours on it now. While I was building cabin, I was going on and off on the tractor a million times but I never noticed. Yesterday, I was hop onto tractor and I found slight movements of cabin. But it can't be. 'cause cabin is bolt it down tight to the frame of tractor. So...

Please, Don't laugh on my cab~!!! I never welding ever before, never worked with metal... I bought small Mig welder from auction ($70) but didn't work. so I had to fix it myself... and it works okay for now.;) I'm going to finish a little more on this cab. and I'm going to take the snow...

Okay, I just changed TDH oil for hydraulic transmission and filter. and checked clutch free play (1") and gap (9mm). but Still same gear grinding............. but Guess what~! after I depress the clutch, wait for 3 seconds and shift gear in... No grinding~~~!!! Is it normal~~~??? I doubt...

I have John deere 6' Snow blade with electrical hydraulic cylinder (to lift). so I have to modify this to fit into my B7510DT. but I have a bit different idea for it though. 'cause, I want to use Bucket to move snow and want to use snow blade for not much snow pile. and for heavy snow, want to...

Hi~Vic~! I'm your big fan now~ :D I've watched all your videos, Well~ almost. and I really, really thanking you. and all those members of kind post too. and big thanks to Keith that welcoming me~ ;) Any how, I just bought B7510DT as used. 21Hp diesel, 440 hours, 4' Loader, 4' snow blower...