Search results

Starting on my winter projects on my BX2680 - I need to replace the inner tie rod boots. One boot was cracked slightly when I bought the tractor used and now both are cracked open. Are the Botaproducts (bxtractorparts.com) still the go-to aftermarket boots? I did see that Kubota has a...

I know oil related threads can go off the rails, but I just wanted to get some feedback from BX or other model owners in the colder winter areas of the country. I'm in upstate NY and getting ready for my 2nd oil change on my BX2680. I bought it used late summer of 2022. I changed the oil after...

I'm looking to install a block heater on my new to me BX2680 when I do a coolant change. Part no is 70000-73274. It is a screw in type rather than the freeze plug replacement on the smaller D902 BX2380 engine. I've got the install instructions from the dealer which are pretty generic, looks as...

I've had my BX2680 for about a year now, I have been very satisfied with it. I wanted to ask the forum members if there is some adjustment I could make to reduce stopping distance once you release the hydro pedal in forward or reverse. I'm used to my JD GT where the reduction is more aggressive...

I picked up a used BX2680 last year. 2019 model and was used by an older couple for their small property with some horses. It came with both a 60" mower deck and a Del Morino 60"/5' rear finish mower. I didn't get a chance to ask when they used each mower. At this point, I don't need either...

I'm looking to purchase a flail mower for my new to me BX2680. Looked at rotary cutters, but the length, for both my trailer (14') and maneuverability, made me look hard at flail mowers. I like the more compact size of the flails and from what I read and from YT videos, are quieter. I'm mowing...

Good evening - topic has probably been covered before, but a search didn't turn up that much. I'm looking for a BB for my BX2680 I picked up last fall. A 4 ft BB seems to be norm for the BX and there are many options out there in that size. My question is with regard to adding wheel spacers. The...

I picked up a used BX2680 a few months ago. It has turf tires and was used primarily for finish mowing. My planned use is more all around without much finish mowing, at least for now (loader & box blade work, tiller, flail or rotary mower). I've been searching the internet including this forum...

I'm ready to start the fluid changes on my new to me BX2680. Anyone have the torque values for the engine oil and hydro drain plugs? I don't have a service manual yet and I'm having trouble finding anything specific on the web. Torque specs on my cars/trucks are in the 18 to 30 ftlb range on the...

My new to me BX2680 was used mostly for mowing, so I've been cleaning up some grass clippings, etc. up under the bottom of the tractor. I pulled the right rear wheel to clean out that area and I found an electrical connector under the fender below the FEL control valve. Anyone know what this is...

I've been working on pulling my maintenance parts and fluids for my new to me BX2680. I'm finding the right parts and fluids and everything makes sense other than the air filter. Using the Kubota.com parts site, if I use the Quick Ref Guide for the BX2680, it lists a K1211-82320 air filter...

I just picked up a used BX2680. It was used by an older couple with a small amount of acreage and horses. It has turf tires and was primary used for mowing. FEL bucket shows very little use, I was told just for mowing manure which seems accurate. My use will be FEL work, finish mower and either...

I just picked up a new to me BX2680. It has just over 200 hours, was owned by an older couple with small acreage and horses. Primarily was used to mow, both belly mower and they used a rear mount finish mower for the pastures. Looking to see if I can get any maintenance records from the selling...

I was reading another post about analysis paralysis - I think I'm there. Starting looking for a CUT in late spring, based on specs and just looking at various tractors on the dealers lots, I thought the B01 series would be about right for me. Problem was I found the operator station somewhat...

Trying to move forward on a CUT this summer and used/new market for CUTs seems to be pretty bad, at least here in the Northeast. Was planning on buying used and looking hard at the B2650 or a B2601. What I'm seeing is few used units and pricing close to a new LX2610. My local dealer has both...

I've been getting some good comments on a couple threads regarding my CUT purchase this year. I initially started with B series, small or large frame and then downsized my thinking to possibly even a SCUT (BX or 1025R) since I maybe I could mow as well it. I've since abandoned that thinking and...

I am looking to buy a SCUT/CUT this year, most likely used to stay within my budget. I want to stay with either John Deere or Kubota for resale if I find out that I need something bigger or smaller. Based on specs and checking out units on dealer lots, I initially was looking at a smaller frame...

First post on the forums - been reading for a while since I starting looking at compact tractors. I narrowed things down to likely a B2601 or even possibly the B2401. Problem is I don't plan to purchase until later this summer or fall but my current steel 18 yr old 5x8 trailer is almost no...