Search results

if i add dye, how long till the dye is mixed well enough to view thru the glass?

Is there any trick to check fluid level on the transmission fluid? The window is clear and i don’t know if it is way under or way above. Is there a way to tell? I opened up the drain plug a bit, and the fluid is clear.

If i plan to leave the thumb baseplate on my bucket, can i just either bolt or weld directly to the bucket?

that is what i am looking for. So you drill 4 holes, assuming to secure the baseplate and then weld the whole thing to the bucket? What is the purpose of the added bar plate in between the bucket and baseplate? can i just weld the baseplate directly onto the bucket? My bucket has an added plate...

So i finally bought the thumb and i purchased a 3rd function kit from Summit. This will be my first upgrade on the l2501. can anyone give me any advice/tips on how to attach the thumb to my bucket? It seems like some use anglw iron and weld, and i have seen a square tubing to attach the thumb’s...

With tractor stopped, i put the joystick to full forward, and then punch it, the bucket hits the ground with a thump and stops. I curl the bucket up, bucket lip facing up and start reverse. I understand the danger of putting the front lip of the bucket contacting the ground. If i don't float, i...

Thanks. So basically the bucket’s own weight is dragging along the surface. in my case, float is still digging into my gravel roadway, i think i just need to practice backgrading with my bucket more often:)

That makes sense. So if i place a large log under the bucket, the bucket will just sit on top when i move it to float?

So when i punch the joystick to go into float, it seems the bucket is scraping the ground more than i’d like, even after i curl it up. How does the tractor know the level to maintain the loader height in relative to the ground? I didn’t think it could be adjusted? i am hoping to use float to...

Where can i purchase HLA pallet forks? Do they have an online dealer list?

I like the smaller size stump bucket, but nobody has it in stock. Palletfork.com is the only vendor yhat has in stock titan stump bucket.

Is it worth extra $300 to get either the cri or goodworks “smaller” version rather than the titan?

Looking to get a stump bucket to help loosen some roots. Have anyone used one from Titan, or good works or cri? The titan one seems to be the longest, and cheapest. It seems like you don’t want too much fulcrum from the bucket that can overstress the loader. Any real life experience using any of...

It was indeed the parking brake. Last person used it jammed it in so hard i didn’t bother to check. Thank you for helping a newbie:)

No, it is good to go on Low 1-3, but above seems to stutters. My foot is completely off the clutch.

I tried with 1700 rpm, and tried to engage the clutch with High 1, and bit more gas, the engine still stutters. What did i do wrong?

Is there an online place that has good prices on oil/parts? Is a gal of udt2 for $25 ok deal?

Glad the OP is doing ok. Thanks for sharing.

Can i switch to higher gear while in motion like a stick shift auto? I start in low gear and when i depress the clutch, the tractor keeps lurking to a stop.

Thanks for all the good tips