Search results

Thank you....I know where the feedback rod is (with the two nuts) . I just removed the backhoe to install a logging winch and haven't found a good way to adjust rod. Are there any links to procedure? I have tried search to no avail.

Understand! Didn’t think of that. I would be pressuring the diverter AND the line feeding the dump cylinders at the same time

I noticed most individuals install the solenoid up near the controls and plumb everything from there. Then running long hoses to crossbeam for couplings. For ease of installation is there a reason not to mount solenoid on the crossbeam and run the control harness down to it? Wire is cheaper than...

Thank you , if I had found that information in the beginning that is the route I would have chosen. I spent a day on line doing what research I could and wasn't even sure if the L35 had a beyond port so the diverter was the easiest and cheapest as I could find. I appreciate the help but alas...

Using a diverter kit from Summit and making hoses locally I am at a hair over $520, kits from WR Long or Summit for PB run around $900

Thank you for the info. I am aware of the difference but for the cost of a third function I did not see that much of an advantage and yes, I have ran all types of equipment during my career in the construction industry. I'm just not real familiar with the mechanics of hydraulics.

Diverter for grapple

Well you just made my life easier:) Thanks for the info

Yes and correct me if I’m wrong but my bucket functions would also be reduced to 13 gpm due to the diverter? I don’t really know how much power I would lose on the lifting arms.

I have been on phone and computer most of the day looking. Messick's has been my go to but they said three weeks, "maybe". Afraid to go with a 13GPM because I think I will lose too much power.

It appears as if no one has anything in stock for L35. Tractor Data has listed as 17gpm and everything looks to be 13gpm. I have a forestry plan in motion on twenty acres and really need a grapple on the machine.

Thank you much! Will check it tomorrow.

Hi All, new here and new to Kubota. Just purchased a L35 and when I have the 3PT all the way up it appears to be still pumping fluid to the arms unless I open the "lock out" valve ( one between my knees). Then it appears to bypass the fluid to the arms. Is this normal? Thanks Bill