Search results

  1. Winkles_9

    WTB FEL for L3600

    Have you tried looking on tractor house and searching dismantled machines? Sometimes they list the tractor, and you could inquire them about the loader in the pictures of the dismantled machine. I would look up several machines that use the same loader, look at the pictures and see if they have...
  2. Winkles_9

    Old McGee 320 snow blower rebuild (Kubota L32)

    That looks like a lot of work!
  3. Winkles_9

    Flail Mower Questions

    I do not own any Ironcraft stuff, but Messick's just put out a video explaining the differences in a "value" priced implement. It made me look at the Ironcraft just because most people don't use their stuff everyday, and an implement twice as expensive isn't always necessary. I think I would buy...
  4. Winkles_9

    Grass gathering devices

    I have a cyclone rake I primarily use in the fall for leaves, but it does a really good job with pine needles in the spring too. I use it behind my zero turn mower. They have their own engine and fold up really nice to store.
  5. Winkles_9

    L3301 3-Point lifts better when raising loader arms

    My hydraulic fluid is good. I usually run a quick hitch but I did remove it for this to try and get the implement closer to the rear of the tractor. My top link was in the top hole, and I have a hydraulic top link as well. How do I change the settings for the lower links?
  6. Winkles_9

    L3301 3-Point lifts better when raising loader arms

    Is there any way to increase it or shut off the flow to the loader and direct it all to the three point? I assume the loader valve would just bypass the flow if I unhooked the loader completely?
  7. Winkles_9

    L3301 3-Point lifts better when raising loader arms

    I rented a Land Pride OS1572 yesterday, and my L3301 was struggling to lift it. I know the seeder weighs right around 1600 pounds, which is close to the capacity of 1900 pounds. Every Kubota promotional picture shows the seeder with an L series, and the dealership told me I shouldn't have a...
  8. Winkles_9

    BEST BUY pop up ads

    I've been using duckduckgo for many years. It blocks all the pop up ads and doesn't track you. You won't get targeted ads on other sites either.
  9. Winkles_9

    Gear heads

    I just had this problem with my suburban. If the tires are rotated, the car doesn't know the position of the tire anymore. You need to code the truck with a tool to each tire. There are plenty of videos on youtube to show you how to do it also.
  10. Winkles_9

    3301 HST with QH & rear snowblower

    In my opinion, I love my quick hitch for every implement I run on my L3301. I have an older Farm King blower which is NOT quick hitch compatible, and I have looked at it several times to modify it for a quick hitch. I would love for it to work, but the mounting is quite a bit different and...
  11. Winkles_9

    add on fuse box

    I added on a fuse box using a main lug from the battery, but I put a relay in between so the fuse box shuts off with the key. I believe I used a 30 amp rated relay with 10 gauge wire. Another important thing, a large 30 amp inline fuse off the battery protects the relay and the fuse box down the...
  12. Winkles_9

    King Kutter Professional tiller

    I purchased the king kutter 5' professional for my L3301 last spring. It has been a tough tiller and I have tilled through a lot of rocks. The only problem I have with it is that it is green!:eek:
  13. Winkles_9

    Mosquito Barrier

    I usually get them from a local dealer but it looks like amazon has them as well. https://www.amazon.com/Spartan-Mosquito-Pro-Tech-Acre/dp/B09B1BP1JH/ref=sr_1_2?crid=24K4Y7H3GP74Z&keywords=spartan+mosquito+eradicator&qid=1651580551&sprefix=spartan%2Caps%2C118&sr=8-2
  14. Winkles_9

    Mosquito Barrier

    We have been using these the last 3 years in Minnesota. They work great. https://spartanmosquito.com/
  15. Winkles_9

    Die Cast Tractor

    My son is obsessed with tractors. I have looked an awful lot to find a die cast model of any kubota. Unfortunately I have only found plastic models. Nothing in die cast.
  16. Winkles_9

    Disadvantages of a 48" disc harrow on an L2501?

    Would there be a way to move the disc over to one side and cover one tire track? Then you could plow like a traditional moldboard plow and cover up one wheel track anyways...
  17. Winkles_9

    Snow plowing

    That thing is looking nice!
  18. Winkles_9

    Lx2610 / LA535 loader grease extentions

    I do something similar here in our manufacturing plant. I custom make hydraulic hoses to length and install them into the grease fittings. It is rather expensive, as grease guns produce a lot of pressure and you need to make the hoses with a high enough PSI to handle the pressure. They do it on...
  19. Winkles_9

    Hydraulic Top Link L3301

    I need some help selecting a hydraulic top link for my L3301. I have two options from a local distributor, and I was wondering what you all thought. The only difference I see is the Base to Ball Center Length. One is 3.5" and the other is 7.563". The compressed length is also different. One is...