Search results

  1. B

    Wicked 55

    I purchased the Summit and installed it myself.
  2. B

    Wicked 55

    Just got the email and should have it delivered on Monday. Can’t wait to put it to work! Ordered 4-1-22.
  3. B

    Landpride fixed Bar Box Scraper (BB1260)

    I had heard about some people having the same issues. I decided to spend a little extra money for the Woods. I have seen some that the square tubing is twisted because the holes going through it weakens it. I just finished helping a friend wrap his with 1/2 inch 4x4 angle to repair it. Maybe...
  4. B

    Bumper for l3400

    I would guess around 60-70 pounds. It took some time to figure out the maximum width and I needed and exactly where to put it so my FEL and tires wouldn’t hit it.
  5. B

    Bumper for l3400

    I made this out of a piece of 4 inch square tubing 3/4 inch and put the D-ring on it for a tie down point when I put it on my trailer
  6. B

    How do you tie/secure your tractor to trailer / front or backwards with canopy?

    I use chains to secure my tractor on my trailer. I made a bumper for the front and welded a D-ring for the chain to go through. The rear I tie to my implements on the tractor since they are connected to the tractor.
  7. B

    L2501 Adj rear wheels

    When I first got my tractor I jack it up and moved my R1 tires front and rear from one side to the other before adding water to them. I gained more stability and traction.
  8. B

    Protecting the front end

    I have a L3901. I had to move the bumper forward 1 inch as seen in the picture to make sure that the tires didn’t hit it. The total length is 36 inches to allow clearance on the loader arms.
  9. B

    L2501 Adj rear wheels

    Jack your tractor up and move the tires from one side to the other.
  10. B

    Protecting the front end

    After working with my tractor a few times, I realized that I needed to add some protection for the tie rods and weight to the front end. Grill guard is 1/8 thick SS and powder coated. Bumper is 4x4 x 3/4 inch for a little extra weight. Added a D-ring for a tie down point.
  11. B

    Tractor Supply Box Blade

    I thought about the one from Tractor Supply, then I purchased the Woods BSS60P model. I liked that the scarifies do not go through the tubing as seen in the attached picture. I have known some people that have broken the tubing and lost their clips too. Cost a little more but well worth it. It...
  12. B

    Replacing stock headlight bulbs with LED

    These bulbs are the same ones that I have in my 2004 Honda 450 four wheeler for 3 year. I seen they had the same base and tried them in my tractor and they worked. So I ordered another pair for it and to my surprise they work on high and low beams as they should. Hope this helps and the price...
  13. B

    Replacing stock headlight bulbs with LED

    Thanks everyone for the great information. I did some research and found the following LED lights on Amazon for my tractor. They fit perfect in my tractor and to my surprise they also work on high and low beams. I ordered what I thought was one each due to not a very good description on them...
  14. B

    Replacing stock headlight bulbs with LED

    The tractor is a L3901DT. Thanks for all the great information. I have attached pictures of the current bulb.
  15. B

    Replacing stock headlight bulbs with LED

    Looking for LED replacement bulbs bright white with around 8000K and 100 watt rating. Must have high/low beams also. Does anyone have any suggestions on this? Stock lights are not bright enough. Thanks in advance for the information.