Search results

Hi, started a new post on my Howard HR10, got a good deal and I'm still having fun. As you can see chain has a little slack in it and out of adjustment bolt length with jam nut. I was thinking, could that be the sprockets getting worn! If I length the adjustment bolt (.50 jam nut thickness)...

Came across a Howard Ratavator (tiller) and I couldn't pass up. It's a HR 10 series and yes a little on the large size 60", no PTO shaft. (under 175 w/clutch) My research came up with 25HP min. hitting the scale at 627 lbs. Tine shaft rotates free. Looks like the chain cover been replaced. I'll...

Hi looking for a little help. Trying to track down some information on a Spanish made rototiller AGRIC, model AF 50 also what's the difference to the AL series. I Gooo, searched it and came up with series AL and AFMG. It's used CL unite that was on a tractor a gentleman purchased. He's asking...

Hi all, just wanted to share my new to me a Servis equipment rear grader blade, LS model with a 6' blade. While doing or trying to do a little research, after the fact of owning. It looks stout with 3/8 rolled mold board. Pobaly as seasoned as me. Shhh, I'm hoping for a little snow cover in the...

Hi, maybe I didn't get this but in Bx manual it says CJ-4 oil is meant for engines with a diesel particulate filter (DPF) and not to use on this tractor. I'm assuming my BX2380. On my Dodge truck I use Delo 400 LE 15w-40 and have a good supply of and was hoping to share. Knowing I don't have an...

Just a quick shot of Small (27") Add-A-Grapple on my BX2380. Wow, yes there will be a learning curve! But will assist in taking care of task around place. A lot easier moving brush pile then log (firewood branches) or a little better arranged.

Started assembling my carry all project a couple days ago, using the Yintatech 3 point pallet forks as a building platform. Here I have a 48x48 deck with 22inch high back board,, I may go up another 2x8. I do plan on adding a couple handled tool holders and lets not forget a chain saw Scabbard...

Looking at older 42 inch mower with PTO shaft, What I can tell from poor photo, grass blades need replacing (fairly beat up and bent. Their held in by cotter pins not bolted like I've seen others. rotor appears straight along with rear roller. Seller is asking 900.00, blue fading in color, with...

Back in December 2022 right after I purchased my BX2380 I purchased a six foot bucket cutting edge. My plan was to shorten and drill and counter sink Machine Allen head bolts with serrated locking flange nuts. Well, I finally finished it up after having extra flange nuts after completing wheel...

Well I'm on the last f of installing 3rd function on BX2380 with rear remote. Looks like I'm going to tape into the systems optional 3rd function fuse position. Hopefully they already have it wire, I'll just need to trace over to where the factory taps into it for their 3rd function unite. I...

Hi all, looking at mounting JD wheel weights BM17972 (50 lbs.) on my BX2380 rears and was wonder if anyone has? The 1025R uses a 12 x 12 wheel also. I'd like to find a fair price on a used set. but everyone trying to retire on wheel weight sales, freight cost doesn't help.

Hi looking at doing the hop, skip and jump to getting a more modern and... tractor and leaving my B-5100DT for other task and I've landed on the B series, B2320DT Gear drive that is. It's a couple of grand higher than the BX's listed in areas CL, except for one with 41hrs. on it. The B has 441...

Hi, well the battery that was in the new to me B5100 a few years a back is showing signs of " I'll start when I want to". Anyway, we all know it takes a Grp. U1 battery with 35 AH. So I've been on the look today and I see company's selling an AGM replacement with a listed 35 AH 70.00 (1 yr...

Hi all, have a B5100DT, oh like it says. was wondering what's to small of pto HP to use a PTO chipper / shredder. Mind is rated/about 10hp I currently have and using an earlier Mighty Mac 12p (12" FW with Hammers) 4" controlled by a clutch belt system which is helping control of windblown tree...

I was servicing hydraulic suction and pressure line with O rings and copper along with transmission screen inspection and cleaning if necessary. when I notice and recalled seepage from my FEL tilt cylinder. Everything was drained I thought it would be a good time to address this. Did a few...

Hi everyone need some help on figuring out what size Hxxx bulb is used on my B5100DT I found that it's a 5w bulb which is pretty low power but what do you need for running light, I have some H2 and H3 bulbs but their 55 and 100 watts. I have the glass lens still intact and I thought I'd my use...

Installed Runleader Rotating shaft hour meter Tachometer (Runleader RL-HM019C) it's reading RPM's and that's all I need it for. The problem I'm having it's displaying to high rpm excess, full throttle 7500 and start up 2800. Trying to go through Amazon to chat with sell Runleader for...

Hi for those of us who are looking for tires and wheel for a change over set(2 sets) Ag. and field and grass aka turf, something with good traction but weight is distrusted over a wide tire patch with more weight capacity ( like for me the B7100) and not just traction bars like on a agriculture...

Hello all, I have a B5100DT with duo PTO speeds of 540/1000 my Mitchell RC40 bush hog has a manufactures suggested pto speed of 875. When I purchased my little extra hand the deck was on and I did a pass with it in the previous owners field but only at 540 rpm (low) I only have a fence line to...

I'm aware this has been covered but not able to locate for my case....tractor :) Well I got a new tool for my little orange work hand (B5100DT) I attached the box scraper to the tractor and did my 3 pt. linkage adjust raised RPM's to just under max (3000 just under full) and lifted without...