Search results

  1. B

    ZD21 Electrical Issue

    Thanks Dustyx2, This should fix my issue
  2. B

    ZD21 Electrical Issue

    My bad on earlier test for voltage at the starter solenoid, I hadn't connected the seat safety switch. After connecting the seat safety switch I am getting 10.8 volts at the starter solenoid. I installed the new shut down solenoid also. I started the engine by jumping the solenoid and was...
  3. B

    ZD21 Electrical Issue

    No voltage at all at the starter solenoid. All of the safety switches tested good but if one or more is only working intermittently it may cause my issue? I am going to jump out all of the safety switches one at a time, till all are bypassed to see if this may be the issue.
  4. B

    ZD21 Electrical Issue

    I didn't get to work on it today and now at 1:45 pm it is 108 degrees in my shop. I'll check the voltage at the starter solenoid in the morning and let you know what I find.
  5. B

    ZD21 Electrical Issue

    Since replacing the "box" the key still won't shut off but I did find that the stop solenoid was bad, it should be in today. But it still wouldn't start with the key either after replacing the box
  6. B

    ZD21 Electrical Issue

    I tested the switch as per attached and it checked out OK
  7. B

    ZD21 Electrical Issue

    Yes, all the fuses are good
  8. B

    ZD21 Electrical Issue

    I checked and it was ok
  9. B

    ZD21 Electrical Issue

    MY ZD21 (2003 model) won't start or shut down with the key switch. I can start it with a screwdriver at the starter and it runs fine. It won't shut down with the key though. I manually shut it down at the injector pump. I tested the shutdown solenoid and it was bad. Ordered a new one. All...
  10. B

    MX5100 hard to start

    Starter acts like a weak battery. When trying to start, the starter will barely turn over the engine and then start "clicking" like a weak battery. Put a new starter and battery on it and still the same issue. I can start it but it takes about 8 - 10 tries of turning the ignition key on and...