Search results

  1. marrmanu

    What to look for in a used bandsaw mill?

    I got a line on a used woodland mills bandsaw that i will be taking a look at, any suggestions on problems to look for. Thanks Mike
  2. marrmanu

    Tall grass under belly protection

    A couple of years ago after mowing one of our fields I noticed Hyd oil pooling beneath my B2620, Oh "you know what". Ok, its a good thing I kinda like tearing stuff apart, as the tallgrass had wrapped itself around both ends of the propeller shaft destroying the bearing seals. Of course the...
  3. marrmanu

    On a roll now!

    Got all me implements on dolly's now. So much easier to hook up! And put to use some stuff that's been laying around. :giggle:
  4. marrmanu

    Hose dust caps that stay on?

    Anybody else find that the rubber OEM hydraulic hose dust caps for the male ends don't stay on very well? I've been searching for metal caps which we used on the jaws of life hoses, but can't seem to find them. Any ideas out there?
  5. marrmanu

    B2620 and 6' land plane

    Looking at a 6' foot land plane which is stated to be rated for 25 plus hp tractor. Anybody out there with experience with a setup like this on B2620 ? Thanks
  6. marrmanu

    Make shift land plane

    I had 12 yards of gravel delivered for my road. I asked the driver to lay it down at a 2 inch depth. I guess he decided that an 8 plus inch depth would be better. After using my box blade to cut it down and spread it out I ended up with a lot of woopedos. Not having a land plane I came up...
  7. marrmanu

    Spring is sprung

    Getting ready for the warmer weather, and working out my custom 3pt forks, sure smells like whisky around here!
  8. marrmanu

    Is this a fair price?

    Is a $400 fair price for this pin on forklift attachment?
  9. marrmanu

    Check your splines!

    Putting my B2620 back together and the mid front axel drive U joint line would not go onto its drive shaft. A closer look reveled this! Cost of a new U Joint $130 o_O cost of further damage o_Oo_Oo_Oo_Oo_O.
  10. marrmanu

    If you have a B2620HST and do not know this you should.

    This would also apply to the B2920HST and B2320HST. The Operators Manual P. 65 does not mention removing the drain plug in the clutch housing cover. The Workshop Manual P. S-14 does indicate removing this plug to drain the transmission fluid. This might be common knowledge, but just thought I...
  11. marrmanu

    Need to replace propeller shaft output seals on B2620

    I am getting ready to replace the output shafts oil seals for the propeller shaft on my B2620 and would be interested to hear about others experiences with this repair. As all ways, thanks for the advice.
  12. marrmanu

    Did this ever work???

    B2620 PTO safety switch function ?
  13. marrmanu

    12 Volt exhaust extractor

    Moved the tractor out of the shop and into a new storage building. Because the prevailing wind comes straight in the door with no vent in the rear of the building I put together this extractor.
  14. marrmanu

    Hydro pressure specifications on a B2620?

    Anybody know where to find the Hydraulic pressure specifications for a B2620? Did a search here without luck, maybe I missed something. thanks
  15. marrmanu

    New style fuel cans

  16. marrmanu

    Honey did you let the cat out?