Search results

  1. L

    L35 Starter Wiring Pictures

    Well, I think I have it all sorted out. A couple of different issues I found, but I'm still not really sure as to why it was hacked up in the first place. The key switch is working how it should now, as well as the safety switches. The combination switch for the lights/hazards wasn't working...
  2. L

    L35 Starter Wiring Pictures

    I'm hoping I can still salvage this harness, but I was definitely planning on replacing some connectors. Good tip on the Deutsch style, I think I may even have some around. I was trying to test my timer relay last night and believe that its dead, I couldn't hear any clicking when I put power...
  3. L

    L35 Starter Wiring Pictures

    Thanks so much Calibdovah and Nicksacco, I'll dig into it more tonight with this information in mind. I have been using it as is for the last year or so, but recently the key switch has been intermittently not working and I wouldn't get any glow plugs or dash lights. I would have to jump the...
  4. L

    L35 Starter Wiring Pictures

    Hi North Idaho, I have the wiring diagram, there's just a few things that aren't adding up comparing the diagram to what's actually on the tractor (or what's left of it). There may be a few different issues I'll have to solve as I'm assuming they did this because a component failed and they...
  5. L

    L35 Starter Wiring Pictures

    Hi all, I've got an L35 that the previous owner hacked a bunch of wiring up on and I would like to return it back to factory (or close to it). Right now, I need to turn the key switch to the accessory position as normal, but then use an extra start button they have wired in to start the...
  6. L

    L35 TLB Won't Move

    Figured I would post an update as I believe I got this fixed. Big thanks to North Idaho Wolfman for all the help. I ended up splitting the tractor as I couldn't find any other issues that would cause the low clutch pack pressure. Once I split it, I found that one of the seal rings for the...
  7. L

    L35 TLB Won't Move

    I managed to wrangle the tractor into the workshop today, of course we got 6" of snow last night to add to the fun... The power steering worked fine while I was towing the tractor around. Seems like all signs are pointing to a hydraulic clutch issue. I pulled the GST valve body off, I guess...
  8. L

    L35 TLB Won't Move

    PoTreeboy, I used a 12" long grease gun hose that had 1/8" NPT connections on both ends. I had to step one end up to 1/4" npt to thread in the gauges I had and the other went directly into the ports on the transmission. In my experience any fittings 1/4" and smaller are "interchangeable" between...
  9. L

    L35 TLB Won't Move

    I had a chance to check the pressures as per the manual today. The 3 plugs on the GST valve are pretty easy but the one on the regulator valve assembly was a real pain. GST System Pressure: Measured ~395psi, spec is 356-370psi Relief Valve Setting Pressure: Measured ~420psi, spec is...
  10. L

    L35 TLB Won't Move

    Thanks for the emails PoTreeBoy! My local dealer is also sending me a PDF copy of the manual as well. Looks like the manual is referring to an adapter that is threaded into the pressure checking ports. Is this just a 1/8" NPT connection? Just want to make sure I don't need a metric adapter or...
  11. L

    L35 TLB Won't Move

    Hi all, I recently purchased a 1999 L35 with the GST transmission and ~3000hrs on it as I was looking for something smaller and more reliable than my clapped out old Case 580CK, unfortunately that plan isn't working out too well.... I've put about 25-30 hours on the tractor since I purchased...