Search results

Thanks, good video

I thought with tandems you should use less tongue weight .. 8-10% ?

Thanks for the info … think I’ve got brakes taken care of with electric on one trailer axle. tongue weight I can adjust with tractor load positioning to get 8-10% on the hitch and 10 plys should stiffen the back end for handling. The rig meets all the truck weight specs, except they spec a...

Getting ready to tow the tractor wrong tow vehicle or trailer or both?? Getting ready to tow tractor first time and was told by a hauler the Sierra 1500 (‘14 w/ 6.2L eng, tow pkg, 3.73 ratio) wasn’t up to the job! By my calculations the tractor plus implements is 4500#, trailer is 3300# or...

Good points ... I looked at the MTL CV 60 but was scared off by the 400# weight. I’ve actually been looking at the EA Compact 50” Root Grapple as the alternative (275/255#, one larger clamshell lid and removable lower tines, pics below). A bit concerned not rugged enough with 1/4“ plate and...

Wrestling with whether to buy a root rake or root grapple (longer lower tines). Want to move wood and big rocks around the property as well as clear brush. chosen EA, due to strength & light weight for my FEL ( ~ 1100# lift capacity @pin) as I don’t want to give too much weight up to the...

One more question ... tie down points for lx2610/ b2650. Presumably I’ll typically being traveling with the BH and FEL Bucket on ..

Thanks for the help ended up getting a 20’ gravity tilt deck haven’t bought the grapple yet ... still deciding on what type

I got the same feedback from the sales person initially, then when I shared photos of another tractor that had this configuration, they figured it out. i Don’t know the part #’s, but it’s the STD ROPS seat, the non-extended backhoe subframe and the backhoe post and seat. very happy with my...

Thinking of buying a tilt 7x20’ trailer for my kubota ... see a variety of choices out there and wondering if this is best value at 5400$? Plan to carry the FEL bucket With grapple and the backhoe... So by my calc I’ll need all of the 20’

That’s not how they’re advertised ... my experience so far on asphalt driveway/road and concrete garage would appear to support the the advertising. I am concerned with the latest wet weather in the northeast, where we’ve lost most of our snow, of doing too much driving over over dry pavement...

The Aquiline MPCH’s pattern keeps them on top of the tire

How'd the R14's do? I writhed about whether to go that way and ultimately decided on R4's w chains due to the continual icing and steep incline on the driveway

Very helpful ‘old_paint’ thx... went outside and practiced on the snow 😊

So tried using the FEL to push / shovel snow off the paved driveway with mixed results. Tried using the ‘float’ mode and clearly don’t understand how it works. Any help?

I just got some Aquiline MPC chains for my R4’s and they are working great on snow & ice over pavement. GP Outdoors video using studded V groove on gravel roads.

Well I can only validate everything said about the FEL ... I just rec’vd my LX2610 and have already run into the well casing (FEL was up and blocked my view) and carved the lawn while going up hill (FEL too low). Still getting to know my machine and fortunately no major damage yet ...

New tractor arrived! Thanks for all the help on the swivel seat decision... note it did not require the extension to keep the two seats, just $300 extra for the backhoe seat / post.

The tires look great; did you have a pattern to follow grooving the tires

Do you think the seats Will fit back to back without the extension?