Search results

I see that Gearmore still makes the pin on pallet forks. Looks like a possible project in my future. Did you buy your new pins from Gearmore? Or make some?

The lift capacity loss is why I have never done the quick attach. I thought it looked like you had it but looking at the photo's again I realize now that I didn't see a QA. Did you make your pallet forks? How much time does it actually take to change from bucket to forks? I just got a welder so...

Just curious I have a B2910 with the LA402 loader and have been thinking of trying to put on a quickattach for the bucket/forks/etc in place of the current pin on bucket. Did you notice much change in lift capability when you added the quickattach? Thanks.

This is a device you can install that will give you an audible alarm when the power comes back on and you are on generator power. http://www.nooutage.com/thp108.htm

That's funny! Here if we see mountains and forests we know it is a scam. But then, I do live in Kansas! :)

I will be curious how your project turns out. I have also considered changing my B2910 but wasn't sure how much loader capacity I would lose. I often push the limit of what it will pick up now and am not sure I would be happy with any decrease. but having a nice set of pallet forks or a...

Thanks for the detailed response. The suggestions here are certainly better then buying a rarely used expensive tool. Cumbres

your tools were for the inside rings. I was curious of options for installing the center seal on the outside of the piston. I didn't make myself clear. Sorry. PoTreeBoy: I didn't realize there were measurements in the manuals to make tools to aid in getting that seal on. I will do some...

I actually have a set of those and they were useful. This is what the guy in the video used to get that one ring on the outside of the piston. https://www.freedomracing.com/fluid-seal-ring-installation-set-j-46620.html?___SID=U

I believe it was about $45 for the loader arm kit. Not the curl bucket.

It was on the Kevin Robinson channel.

I had a loader cylinder start leaking around the packing on the main loader cylinder. Never worked on one before but thought it would be an interesting project. So using the modern learning method I found a youtube video and watched it. That video showed that it was difficult to get the...

A weird question for you all. I have a B2910 with the LA402 (I believe) loader. Works great with dirt. But if I put forks on the tractor (attached to the bucket) or lift a heavy item I find it difficult to feather the controls. With the forks the bucket will rotate down very quickly. With a...

I have read about algea issues in diesels for a long time but have never run into it myself, thankfully. But in reading the recommendation for adding biocide I wondered if my habit of adding Powerservice to most of my diesel fuel is helping to protect my diesel fuel. My tractor, B2910, is old...

Thanks everyone for the info. This filter has about 350 hrs on it so decided it was time to change it. figure that a filter is cheaper then it not running when I need it to and to protect the rest of the fuel system. When I took the cup off of it I found that there was a spring loaded...

So a question. I went to change the fuel filter on my B2910. The manual says as long as the fuel level is less then half that you can pull the fuel filter canister and it should not leak. I have done it before and had no problems. This time I had significant fuel flow even though the manual...

Re: Back Blade choice for Qucik Hitch The main issue for this box blade is that there is a solid welded cross member immediately below the pin for the upper arm of the three point. A quick hitch has the top connection with a hook that has to come up underneath the top pin as the lower hooks...

My current back blade will not work with a quick hitch 3 point hitch. Since I am getting tired of the labor of switching the 2 main implements I use, a box blade which is Quick Hitch compatible (Land pride brand)and back blade that isn't, I am looking into replacing my current back blade for a...