Search results

  1. T

    Too much weight in ballast box

    Thanks. It’s mounted to a quick hitch. I do put the blade in float mode.
  2. T

    Too much weight in ballast box

    Your suggestion is what I tried minus the air chisel. Used a hammer drill to try to make lines. Then a sledge and cold chisel to break it. I believe I have 8 bags of 50 lb cement in there. In hindsight I would do like you said and dial it in for the job. I will only have the box on when...
  3. T

    Too much weight in ballast box

    Hopefully I moved this to the correct forum. I’m estimating right around 600 lbs with the box and the concrete. There’s no issue with lifting. Just steering when plowing snow. It worked great with the fel on
  4. T

    Too much weight in ballast box

    I had a local metal shop make a ballast box that fit my qh 05 quick hitch. The vendor suggested I fill it with cement. So that’s what I did, without thinking right to the top. The three pt will lift it but the problem I have now is the tractor won’t steer to plow snow. Any suggestions? I spent...
  5. T

    WTB: RCK60b23bx 60” mower deck

    Sorry. I should have added a comment that I found one
  6. T

    WTB: RCK60b23bx 60” mower deck

    Hi. Looking for a nice mower deck for a bx23s in the central Ohio area. Thanks
  7. T

    Looking to buy a BX23s

    Does anyone know if the bx23s comes set up to add a mower? I’m lookinh at buying a used one and the owner doesn’t think it is. Says the dealer would have to add some things.
  8. T

    hard To turn knobs.

    Is this something the shop manual would explain? Haven’t gotten one yet but planning to
  9. T

    hard To turn knobs.

    My next question as “new” used bx 2370 owner is about the cutting height control dial and the 3 pt hitch lowering speed control knobs. Should I be eating my spinach before trying to move these knobs? I have to get off the tractor and use all my strength to turn the height knob. The lowering...
  10. T

    2370 wouldn’t move

    Goofiest thing. The nut that holds the rod that connects the pedals to the HST was gone. Apparently sometimes it would lodge in well enough for things to work. Other times nothing. Was a bear getting the a new nut on but solved it. Thanks Paul Short’s video on You tube.
  11. T

    2370 wouldn’t move

    Thanks. Fluid is full and clean. I think the guy I bought it from said he changed it this spring. But I will change it. Engine ran strong with no change in rpms. I didn’t hear any noises after it happened but all day I had been listening to an earmuff radio.
  12. T

    2370 wouldn’t move

    Hello. I bought a 2015 BX 2370 last week. It has 218 hrs on it. Today I ran it pretty hard. My neighbor had a pool put in and gave me the excess dirt. I ran it probably 6 hrs lifting and transporting dirt. At one point it would not move. It was like no power was getting to the wheels. The fel...