Search results

Planning for spring project, remove floor mat to clean well underneath. Better to remove forever and do rhino lining or similar or simply buy replacement clips to replace mat? I figure it should be removed at least twice a year to clean/inspect under it?

anyone know of a snowblower for a bx23 that is ssqa compatible? I've seen some that are "self-contained" meaning no PTO hookups. I'm wanting to have true quick change ability between the snow blower and bucket.

2019 BX23S with 150 hours. I have added coolant twice to the marks on the jug and the jug is empty again. No sign of leaks, no sign of coolant in oil, machine runs great. Coolant is full when opening radiator cap. Is this normal?

Concerned what may be lurking under the rubber floor mat on my BX23. Saw a vid where the spring clips basically are destroyed upon removal. I'd like to get under there and see what's developing if anything in terms of rust. Any good suggestions?

I Want to add a horn to a BX23. Go with a battery operated type bike horn or hardwire one? Looking for recommendations/suggestions.

BX23S with QA standard bucket. Any idea of capacity in yards? Seems to be about 5 bucket per yard?

I know that starting a diesel is a violent act. Mine has been sitting for over a month without being started. I'm in the northeast and it's been cold but not super cold like some people have been experiencing. Is there anything a person can do to make it easier on the engine or am I just being...

106 hours on my BX23s. When in float for winter moving of snow it seems to come out of float and into lower position now. Was fine previously. Is there an adjustment on the valve? I want to use float so that I can still steer the tractor but it ends up lifting the front wheels off the ground.

I am a 220# guy. I noticed yesterday that every time I get on the tractor (BX23) I use the steering wheel to pull myself up. Due to a right knee replacement I need the extra bit of help. Am I doing any harm to the steering column?

Wondering if a receiver mounted winch on the 3PH would work on a BX23? I have pulleys/cables etc. and wonder if the battery/alternator would support a 2500#winch? Likely would never get close to the 2500# with pulleys etc. so I could go smaller winch.

One year and 66 hours in on a BX23, here’s my list of Pros and Cons Pro: perfect size for my 3 acres. I do not have the MMM as I have another lawn tractor. Pro: Convenience of having it when you need it. Pro: Easy maintenance mostly Con: Rear fuel filter. Sadistic son of a gun that put that...

Did my 50 hour this weekend and changed the hydro fluid as well. All went well, relatively easy and aided by the info found here and a few excellent youtube vids. I decided to hold off and do fuel filters today. went out this morning and she started, ran a couple of minutes, coughed and died..I...

Anyone with experience with PTO caps? I am likely not needing to use either PTO on my BX23s for a few years, so I'm gonna grease the splines and add PTO caps. These are Kubota caps, about $6 each so I figure they can't hurt to cover them in case I do want to use them in the years ahead?

I see a few posts but cant seem to find them now. Going to be loading firewood into a utility cart and stacking. Probably 5-10 minutes between loads. Better to shut the BX23s down or leave it running? If running, leave it at idle or at a higher RPM?

Is it normal to have an air bubble in a liquid filled gauge? Will that affect the readings?

BX23S hydro screen Do you have to remove a rear tire to access and clean the hydro screen? And if so, what is the best way to remove a filled tire with all that weight?

Does anyone offer a backhoe hook? Doing a pondless waterfall next spring and I'm looking for a way to lift slinged rocks into position. Need the reach and ability to move the rocks into position with a backhoe vs the bucket. BX23 by the way

Any thoughts on adding rear wheel spacers on a BX23? Do they void the warranty?

anyone use lock n lube grease coupler, I bought the XL for some of the harder to reach fittings? I also bought the grease caps, any thoughts.

On the thumb arm there are 2 pins with no grease fittings although they are pivot points when adjusting the thumb, I assume these should be removed periodically and greased to avoid rusting into a stuck position? They are held in by 2 bolts and lock nuts (not the same size bolts strangely...