Search results

Anyone know what the torque speca are for the exhaust manifold on a B1550 HSE?

I'm looking for a manifold for a 1550B model part # is 15532-12310.

Everything you see in the picture. The shaft diameter is 1.18"

Yes, the wheel and the part the wheel goes on as well as the shaft or stem too.

I'm in need of the RF (will take a Left) gauge wheel for my RC54-B Kubota belly mower. I'm told the 60" version and maybe the 72" version all use the same wheel assembly. See pic.

The part I need is from the R front of my RC54-B belly mower. Basically it's the height adjustable wheel & shaft assembly the deck rides on. 4 in total. I'm pretty sure the 60" deck uses the same part.

Do you have the right front guide wheel shaft? Doesn't matter if the wheel is in bad shape. I need the assembly the wheel goes on.

Lost one of my mower deck wheels somewhere on my property. I probably won't find it until I buy a replacement. Let me know if you have one for sale please.

It's fixed! I took off the right side step then removed the parking brake pawl to gain access to the backside of where the three bolts fasten the hanger bracket. There were nuts there that were tack welded but the welds broke so the bolts either fell out or wouldn't tighten. Taking the step...

The bolts won't thread. Is it possible nuts were tacked on but now they've fallen/vibrated off? There's no room to access the area where bolts thread into, it's enclosed except for a small area on the side. If you've had this problem I'd be interested to know how you fixed it. Thanks

The bolts won't start to thread, I was wondering if, instead of threads in the frame they tack welded nuts on. The problem is that the brackets attach to square channel that's enclosed except for a small area on one side. I wanted to attach a picture from my manual which shows this but they...

That's funny! I think the problem might be that instead of the frame being threaded (for the bolts) they tacked nuts on the inside. It's a box or a square tube that's only open on one end, not the backside, and there's no room to get a wrench in there. The bolts won't thread so I'm thinking...

For some reason these bracket bolts keep falling out. There are 3 that hold the bracket to attach the mower deck onto the frame on each side. Anyone else having this problem and how did you fix it?