Search results

  1. tjaltz

    Flow of Power Beyond Hydraulics

    If you have PB Adapter that would be great. I was going to call Summit later today to find out when they were expected. Thank you.
  2. tjaltz

    Flow of Power Beyond Hydraulics

    Dan; You have been incredibly patient with me and I appreciate it. I do have one more question. I am piping it together as you suggested, shown in (yet another) flow chart below. I just got a notice that the Power Beyond Adapter from Summit for the P40G-2A1 valve body is on back order. I need to...
  3. tjaltz

    Flow of Power Beyond Hydraulics

    Dan, I removed what was necessary to access the loader valve tank return hose. I probably have a little more room on the bottom to insert a tee than I do on the top. It’s a relatively soft hose compared to the high pressure lines, and is just held on with hose clamps. Is this because even though...
  4. tjaltz

    Flow of Power Beyond Hydraulics

    Thank you Dan. I will take the seat/suspension off to get a better look at the tank return hose, then go back and create a revised flow chart, which at this point has become therapeutic for me.
  5. tjaltz

    Flow of Power Beyond Hydraulics

    I think this is what you’re suggesting. I‘m don‘t really understand the difference between the separate Power Beyond port created with the adapter in the N port, and the pressurized tank return line from the Summit Valve. Since I have to remove the 3 Point to mount the backhoe, I would never use...
  6. tjaltz

    Flow of Power Beyond Hydraulics

    Thank you sir, I think I understand. It shouldn’t take too much for me to adjust the flow correctly. I will just need to replace the banjo fitting and pipe that faces rearward for the backhoe with something that I can connect to the WR Long “P” input. Does this new flow look correct to you.
  7. tjaltz

    Flow of Power Beyond Hydraulics

    Dan It's a Kubota BH-76 Backhoe. Originally the PB circuit was used only for the backhoe, and was usually just connected with the hose loop, as the backhoe is not normally mounted. When the dealer installed the WR Long 3rd function, they fed the 3rd function's P port with the backhoe outlet of...
  8. tjaltz

    Flow of Power Beyond Hydraulics

    Sorry, it may be because I'm looking on a mobile device, but I cant see your response.
  9. tjaltz

    Flow of Power Beyond Hydraulics

    I have a B3200 with a power beyond port installed for a backhoe. I recently had a WR Long 3rd Function installed by my dealer. Now I’m adding (on my own) a two spool manual control valve for rear remotes. I have the piping laid out and just want to make sure there is no problem with my design...
  10. tjaltz

    B3200 PTO output stops while tilling

    I have a well maintained B3200 with 300 hours on it. It has hydrostatic drive with three ranges. I recently added a 50 inch Bush Hog tiller that has a PTO shaft with a slip clutch. I made sure to slip the PTO shaft clutch by following the directions to loosen the bolts, turn it on and make sure...
  11. tjaltz

    Bolt on Step Aide on B3200 with mid mount mower

    When you raise the mid mount deck it doesn’t hit the step?
  12. tjaltz

    Bolt on Step Aide on B3200 with mid mount mower

    Has anyone ever installed the Kubota bolt on step on a B3200 with a mid mount mower installed? Will it interfere with raising the deck? Kubota calls the part a “step aide” part number 6A700-51350. Interested in hearing from anyone who installed it with a mid mount mower. Thanks
  13. tjaltz

    B3200 Tractor/Backhoe Swivel Seat Replacement

    I’m going to keep it in case I revert back. I ended up putting Kubota’s fixed pedestal seat on my backhoe. Easier than flipping the seat.
  14. tjaltz

    Grand L Cab Relectix Roof Liner

    My cab got warm after being in the sun all day, so I needed something. I don’t see how it could hurt. The cab also seems a little quieter after the insulation, not as much echo. Once I get the windows tinted, I’m hoping it will be good.
  15. tjaltz

    Grand L Cab Relectix Roof Liner

    I have a 2019 L6060HSTC and on hot summer days my AC struggles to keep the cab cool. I regularly blow out and wash the radiator and condenser fins and make sure my cabin external air filter and internal air filters are clean. I plan on tinting my windows eventually, but right now I have the roof...
  16. tjaltz

    B3200 power beyond, 3rd function & rear remotes

    Thank You. I just want to make sure I understand. In this single diagram I attached, pipe#1 (with the coupler) is the pressure feed to the backhoe, and pipe #2 (backhoe outlet) is the return? My 3 point lift arms go up and down while the backhoe is connected. There is obviously no linkage on...
  17. tjaltz

    B3200 power beyond, 3rd function & rear remotes

    So in my application, it looks like the backhoe's power beyond port is the first thing fed by the PB port on the valve body, is that wrong, or am I reading that wrong. Is "#1 Backhoe Inlet Pipe" in the diagram the return from the backhoe's power beyond ports actually the last in the PB loop?
  18. tjaltz

    B3200 power beyond, 3rd function & rear remotes

    I have a B3200 that has a BH-76 backhoe sub-frame and rear power beyond ports for the backhoe installed. The backhoe is not normally installed on the tractor, and I want to add 2 rear remotes for use with 3 point implements. Since the backhoe and 3 point implements can’t be installed at the...
  19. tjaltz

    Adding Hydraulic Adjust to LandPride PLL3048 Forks

    I have a set of LandPride PFL3048 pallet forks that I use on my L6060. I find myself having to adjust the width of the forks frequently, and would like to add hydraulic fork width adjustment. I have a 3rd function on the loader, and was curious if anyone has ever added a hydraulic adjust...