Search results

Thanks guys, all great ideas. We are trying to talk him into the plumbed water heater option. We had also suggested the diesel heater but he thinks it will be to much work. As far as the cab it stays on al summer and he just takes the doors off and uses it that way. This upcoming winter will the...

My elderly neighbor has a 2001 BX 2200 and he put a Original Cab on it and wants to use an electric (12V) heater to keep him warm in the winter while plowing his drive. The Dymo will not handle the heater and lights so we know we need to upgrade the alternator. Can anyone tell me the Wholegoods...

Yup, there was one spool that we did polish a bit. It fit tight back into the valve. There is no leak in the valve spool top or bucket cylinders. I did bite the bullet and shell out a grand for a new valve. I think I will be replacing it next week. Learned a lot on what to take off and not take...

After getting the kit to fix the broken relief valve ( see my loader problem post ) on our 2012 B2620, and get it installed the loader works fine in all operations, however now the bucket droops with or without a load ! I will be checking to see if it is in one or both of the cylinders for curl...

I got the kit from the local dealer who took the time to check with Kubota and they sold me the kit for $80.00. I did order the new valve because off the uncertainty after I get the old one back together and on. They knocked another 100 of the valve because I have bought a lot of things from...

Well, the relief valve is $ 920 00 ! Just the two relief valves. I called several places to price it !! Looks like a new valve for 200 more. Just my luck. Thanks guys. Appreciate the help.

This is what we found. Looks like the shock caused the relief valve to fracture! Galled the spool also. Valve body looks good.

We have decided to remove the valve body and check it out. I will be laying a old sheet between the tractor fender and on the floor below just in case when I remove the lines something comes out or falls out. More later and pictures if I can get them to post.

No. They are back in their proper positions.

All linkage is connected and free I even lubed it lightly when I put it back together. Up and down has the range of motion it has always had. The curl up functions as it should. The curl down has motion but it does not seem as far as before it stopped working. When we had this torn down to...

Currently it will not dump ! It is like the spool is stuck in the valve body. The spool will move just a little bit in the dump direction but the bucket does not work when I put it back together . It says it has regen on the dump but I do not ever remember using it. I just got done bolting...

Checked all coupling again and they were good. Switched out lines and it operates in reverse with lines switched. but will not operate the dump function now. I believe that there is something wrong with the 2nd position dump detent on the loader valve. Still checking but it is getting...

Thanks. I will try that tomorrow.

Sorry, yes minimally. If I push it by hand it will go down on spring tension but the bucket will not curl.

No that is the problem we are having it will not dump.

Hi all. Need a few ideas on a problem we have. We have a 2012 Kubota B2620. The other day while using it the bucket " down " curl would not function all of a sudden. It would up curl raise and lower . I was lifting a rear blade with it via a chain and the chain slipped and shock loaded the...

Any of you guys have a flat screen tv in your cold garage or shop? I have a big flat screen I want to put in our 30' x 40' garage that is not heated in the winter. I have heard both ways , yes and no. Just wondering what some of you have experienced. Thanks

Thanks guys. Just looked it up and found the numbers. Not sure where to find the race number that fits on the BGB, it does not show it. Thanks again.

We have the typical dreaded front axel knuckle leaks on our 2012 B2620. The left front is worse than right but both are leaking. We do a lot of loader work with it and I suspect that is the main cause. It has just over 400 hrs on it. I have searched high and low but obviously not the right spot...

Back up and running. Just loosened the sediment bowl filled the tank and cranked it until it started and stopped. Tried it again and it stayed running. Tightened the sediment bowl and checked for leaks. Simple change as well as simple design. Easy to change in no time. Thanks for all the help.