Search results

  1. B

    Tractor Supply 4' bush hog vs their SC bush hog

    Looking at the following. One is regular 4' bush hog and the other is supposedly for the Sub Compacts; its in almost Kubota Orange. the SC says Category 1 3 pt hitch and the 4' reg bush hog has a Cat. 1; weight Is within a few pounds. the SC has a front guard. the big difference appears to...
  2. B

    BX 25 bush hog size???

    I am going to use it around the house property to do edge work, on a couple of small pieces that have hay field (less than an acre and up on my range. the owner has a larger bush hog for up there. I would mostly be using for small stuff.
  3. B

    BX 25 bush hog size???

    Looking at a bush hog for my BX 25. the 4' and 5' both weigh less than the 4' roto tiller I have for it. will the BX25 handle the 5 ft? or do I need to go with 4'??
  4. B

    Roto tiller and bush hog for BX25 advice needed

    I have a BX 25. I am looking to purchase a 48" +- roto tiller and a bush hog. I don't want to spend more than 1800 on the tiller. TSC has several. should I go with clutch drive or gear/shear pin for the tiller? any recommendations for purchase in NY State? also, the bush hog. should I go 48"...
  5. B

    BX25 stalling problem

    I just changed the fuel filters when this started so It isn't them. The problem seems to be mostly when i am mowing, I go up an incline, turn either left or right to go back down and the engine cuts out, it just dies. I stop, taker the PTO out of gear and it will sometimes regain itself...
  6. B

    stalling BX 25

    Weird event. has happened now several times. Almost always right after going up a hill and making sharp turn to the left and going back down. Almost seems like the safety switches are cutting the engine out when my weight shifts on the seat, or there is no fuel to the engine. If the mower is...
  7. B

    diesel gelled !

    keep a bottle of Diesel 911 on hand anyway. that stuff works!
  8. B

    Quick Hitch shaft for sale

    I have the shaft from my quick hitch for BX2751A snowblower. I had to convert to mount on a BX25 (original was for BX22.) the shaft is 11 /12" long. email me at bpgunsmith@catskill.net it is the middle shaft fo the set up that rides in the quick hitch. these shafts run about $150.00 new its in...
  9. B

    Snow blower interchangabillity BX24 vs BX 25

    would a piece of square tubing be better than pipe? The round shape would seem to want to ride up over everything, ice, hard snow etc. i would think maybe a square tube front would sort of act to scrape high spots but not dig and dive.???
  10. B

    Shear pin for snow blower question

    For the price they are, i am sticking with factory shear bolts.
  11. B

    Snow blower interchangabillity BX24 vs BX 25

    post a pic. should the ends that meet in the middle be offset form each other or should it form one continuous screw across
  12. B

    BX25 wont start in cold weather

    2010 BX25. I had gelling issues so I cut with Kero. Last time i ran it, it was about 30 and she started and ran fine. today, 18-20 (F) and she started, idled for about 5 minutes and quit. Tried restart, no pop, no sputter. Seems like fuel issue. but where to start? what can be done to preempt...
  13. B

    Shear pin for snow blower question

    I just found out by breaking one; there is a shear bolt that's a plain Grade 5 1/4" bolt that connects the blower to the gear box for the cross screw augers. Its a plain old 1/4" bolt. So, reason would say that a 1/4" on the auger would work but that since they are 5/16, that's why Kubota cores...
  14. B

    Shear pin for snow blower question

    Instead of learning the hard way by experimentation, i figured i would ask and see who may have tried something else. I have a BX2750A snow blower for my BX 25. If you have one you know that Kubota has special pre cut bolts that have a groove in them to facilitate shearing. Have any of you who...
  15. B

    Hydrualics 101??

    What is a good place to look for basic info to understand how to do simple hydraulic systems. i am completely ignorant of set ups, valves, ports etc. I want to do a hydraulic rotator for my snow blower chute. I don't know what kind of motor to get, how many ports etc. What GPM, etc. I need to...
  16. B

    BX 25 snowblower chute crank linkage pics???

    I bought my unit used so don't have the manual. Waiting for one I ordered. Just got it all hooked up today. I had to change the shaft on the quick hitch but other than that it went together fine. Of course i had to take off the grill guard. who can look up and tell me RPM I should be running...
  17. B

    Hydraulic contorl for snow blwoer chute rotation??

    anyone have plans or photos of one you built. i have a BX25 with a BX2750A snow blower. all manual cranks.
  18. B

    best source for motors, fittings hydraulics for customizing

    any suggestions for one or two sources that has good selection of hydraulic motors, fittings, parts etc for building custom stuff for tractors. i want to build a hydraulic control to rotate my snow blower chute for next year. would like to know if there are any plans out there. My curse is...
  19. B

    BX 25 snowblower chute crank linkage pics???

    Babyfat that's the ticket. the mech at my dlr gave me the same. I will be installing tomorrow and trying out soon. Thansk to all of you for your help. Now, next year i want to go with a hydraulic unit. who has a plan or photos of one they made. source for parts to make up cheap???
  20. B

    BX 25 snowblower chute crank linkage pics???

    No, wrong choice of words on my part. The chute control inst hydraulic. The part the dealer gave me mounts to the control lever for the FEL. It is a simple piece that the crank goes through. I meant to say that your hydraulic control tower is different than a BX25. And that the support you show...