Search results

Had problems with my BX today during the blizzard in CT. Went to move some snow tonight with the engine around 2200 RPM and after about 5 minutes the engine started to sputter, dropped it down to idle, to keep it running enough to get it back to the shed (still sputtering). Reved the RPMs back...

Kubota BX2660 – power loss on headlights, dash lights, digital tachometer, lift pump and gauges. Glow plugs, 12 volt accessory port , and hazard lights still work – all the fuses on the panel tested good including the 50 amp main fuse, battery is full voltage and cranks up in seconds despite no...

My used BX2660 didn't come with a grill guard. I looked into fabricating my own or modifying a factory newer BX guard, but I found this one https://earthandturfattachments.com/bx-front-grill-guard/ Ordered it Thursday and it showed up Friday! I spent a 1/2hr on the phone talking BX Tractors...

My BX 2660 is around 8 years old on the original battery, I wanted to replace it pro-actively with an AGM style like I use in my Jeep. Finally found one in the BX sized Group 26R!

I bought my BX2660 last April with 214 hours (previous owner did the major 50 hour service and minor 100 & 150 hr service). I changed the oil & filter and air filter at 285 hrs earlier this year. I thought I was around 385 hours and due for an oil change - turns out I'm at 407 hours and due for...

Stopped by Artillian to pick up a pallet fork set up. Great facility and quality product. Put it right to work! Saved around $185 for shipping - The customer service was outstanding!

Picked up my new bucket today - can't wait for the EA loader mount to come in!

I have a BX2750D Snow Blower with the Mid mount PTO quick attach mount sub frame BX2751 with the BX2752&BX2753 Mid mount PTO kit - For sale $2000 OBO for the whole set up (less than 60 hrs) for local pick up - Located in Columbia, Connecticut near UCONN Storrs. Off my BX2660, but will work with...

What do I need? My local KB dealership mentioned the Kubota mount to replace the loader pins mount with a KB skid steer QH mount for around $450 (around $100 less than aftermarket) and a QH bucket would be around $550. I can get an aftermarket QH bucket mounting plate for $230 if I can find a...

Installed a RhinoHide Canopy to my BX today! Nice fit and covers my entire operator station https://www.rhinohidecanopies.com/

Checked out an old 2003 B7500HST for a friend today. Equipped with a FEL, MMM, canopy on the ROPS. It fired up fine and the loader lifted the tractor. Looks like it is in good condition. Has 1960 hrs on it - owner is asking $9000 for it - OK asking price or high?

Modified an old garden tractor pull behind rake to work with my Heavy Hitch 2" receiver. Worked pretty well. With it mounted to the Heavy Hitch I can give it up to 400lbs of down force if needed!

I purchased this by accident (wanted the piranha tooth bar) Someone mentioned it's good for plowing snow on pavement and prevents bucket wear. So I checked my bucket and after only one winter, the edge was getting buggered up! So I decided to keep the straight bar... I ground the edge...

A friend of mine's financing committee (AKA Wife) gave him the OK to shop for a tractor with a FEL, MMM, Backhoe, and box blade for their residential property to maintain the yard, level some areas, get rid of some stumps, grade their dirt driveway. The tractor would have to replace his plow...

I must have ordered the wrong part number, I wanted the Piranha with the sharp teeth! This one is definitely not what I was thinking Hopefully BXpanded has good customer service...

Added a Bro-Tek belly skid plate extension to my HST skid today. Very well made and fitment was perfect.

Does anyone have a part number or source for rear wheel weights that fit on a BX 12" rim?

I was going over some of the maintenance interval stuff in my BX2660 manual since I'm approaching a 400 hr service. On the air filter page I saw something called the "evacuator valve" that is supposed to be checked often So curiously I checked mine and it looks like it's missing... What...

I bought these for plowing snow on my gravel driveway and to push leaves on grass in the fall. I got the edge extender add on for moving logs and other items wider than the bucket

Had to remove some branches that came down in the last snowstorm the pinch hook worked great! My Bolt on Hooks by Ken Shackle was awesome The Works Jaw Saw exceeded my expectations and made quick work breaking limbs under 4" down in a few seconds