Search results

It has happened a couple of times. If I turn the tractor off while on a hill in gear it gets stuck in gear. The shuttle shift gets very difficult to move and I don't want to break anything. Pressing the clutch or shifting the GST to neutral does not relieve the pressure and the tractor cannot be...

Is it necessary to sharpen the teeth on the feed roller and what is the best method? Works fine with pine but struggles a bit with gripping harder woods

I was reversing to hook up the trailer earlier and when I pressed the clutch the tractor kept driving. It happened a couple more times after that but then it just fixed itself. I'm confused. L3450 GST

Hi Guys, Quick question: Is it possible to just get the inner seal for a loader ram without all the other rings? Thanks

Hi guys, Is there an in-tank fuel filter in the g23? Stalled in middle of a garden. Will crank and start but dies immediately. All fuel filters are new. Thanks for any help

Boss just bought a s/h G23. Before it goes to work is there anything to check

Bush cutting season ends next week so I've made a mad burst at clearing some rhododendron. Problem is that I now have a few piles of waste to dispose of. Burning is not ideal because my neighbours have mature native woodlands which I don't want to risk. How long do you guys think it would take...

When you turn the key it clicks once. After trying a few times it starts right up. Had the battery tested and it's fine. Hay will be getting delivered between the rain and need to get it in before it gets wet.

I got an old PTO sprayer that used to be mounted on the back of a Cushman. The plan is to mount it to the 3pt. I've started cutting it up to turn its orientation 90 degrees so that the tank will go across the width of the tractor rather than sticking out the back length ways. The main concern at...

Has anyone tried using old deep fat fryer oil and would my old L3450 run on it?

Hi, Is there a way for people like me who don't have a PayPal account to pay up? I don't have any use for one and would very much rather not set one up for this single transaction. Thanks

I've tried using the search but maybe I'm asking the wrong question. Tractor goes in and out of 4wd easily but sometimes it just drops out of 4wd, usually when you need it most. It works but sometimes you have to hold the lever in place. L3450GST

Hi guys, I'm wondering what size tipping trailer my L3450 GST would be able to manage. I know I'm limited to 2 ton on the drawbar but would it have the power to handle something like this. I don't intend to use the high side extensions but they nearly all come with them. This example is 8'X6'...

I think maybe a few of you may have similar mowers, so here goes. This one has the 42" deck with side discharge. For its 25th birthday we sent it away to get a major overhaul but since it came back we have had nothing but trouble and the guy that repaired it is cocooning. First day out, it...

Hi guys What do you call the first cut from the outside of a tree when it is being milled. The one with the bark still on it, sometimes used for cladding on fences and such. Google doesn't seem to know but I'm sure guys will sort it out. Thanks

Has anybody fitted contacts to the outside of their tractors for connecting jump leads to and how would you do it? It's such a nuisance having to take of both side panels to get to the battery terminals for a couple of seconds use and of course there's that spinning fan inches away. L3450GST

Inspired by PhPaul, I too have taken on a winter project. I just got an old fertiliser shaker at the right price (free). I was told that the gearbox was seized and the bottom was rusted out. So far, I've gotten the gearbox freed and all the levers and chutes freed (Day 1) The rust repair...

https://www.youtube.com/watch?v=k8KjLoWp_40

Every time I use the tractor the bottom of it gets covered in hydraulic fluid. It can leak as much as half a gallon a day. It also seeps out while parked. But I can't find where it is coming from. Is there a way to put pressure on the system to increase the flow to a point where I will be able...

Looking for Kubota part numbers for fuel, oil & hydraulic filters for my L3450GST. I have gotten the oil and fuel filters from the dealer and they just don't seem to be the same as what is on at the moment. The fuel filter they gave me is a paper cartridge refill type jobby but on the tractor...