Search results

I recently re built my old snow blower(bearings/gears) and figured the lower PTO connection should be running a shear bolt so I put a Grade 2 5/16" x 3",I have gone through 2 so far not abusing it,there is only 1 shear bolt on the blower and that's for the auger,any thoughts on this please?

With a bit of zip cutting and torch love it came apart,I used the redneck penetrating fluid it did its job,things were soaked,but it was to far rusted.It took 18 tons to push what was left of shaft to get pressed out of the blower,both parts had fluid on them also,happy to have a new 41 year old...

So after some zip discing and cutting torch love,I got it apart,soaking all the parts with penetrating oil all summer did not help,as I cut stuff open you could see were the fluid had gotten under every thing,it was just to far gone,it took 18 tons just to press out the main shaft from the...

I am looking to replace these 2 lines I think are return lines they are over 40 years old and leaking really bad now,my question is,will the engine give me grieve trying to restart it? Any other advise is welcomed this is on Grey ZL2202 DT either a D1302 or D1402 engine,I have tried looking...

Hey folks so some thing just came up on another forum about 10W 30 oil vs 10W 30 diesel oil,my grey Zl2202DT-M calls for 10W 30 on a under the hood sticker,now guessing where I live and my last oil change was just general auto blend (dino/synth) 10W 30,its running a D1402 engine,I am due for a...

Hey folks I have an older Kubota Blower that I bought used,last year while using it I broke one of the angles that has the pin on it to attach to the 3pt hitch,I saw where it had been gloop welded and suspected that was the issue.I bought new angles and fabbed them up now,for some reason there...

Hey folks going to replace the clutch soon and one question I have is removing the FEL,seems straight forward but when I disconnect the supply/return lines to the FEL,when the tractor is off when I disconnect the hoses,will all the fluid naturally siphon out the line going to the 3 point hitch...

Looking at replacing the clutch,plate and bearing on my ZL2202Dt (L175 ish) the question I have is it necessary to drain the hydraulic/transmission/dif fluid before starting to separate the unit?

I did a search and cant find it so if you need parts for your Grey Market unit in Canada,there is a place in Saskatchewan called Yellowrose Ent ph# (306) 232-5570 and ask for Sue,Mark from BC Tractors referred me to her and with in 15 minutes she had my 3 rad hoses for my ZL2202DT-M,one of them...

I was moving snow yesterday mostly with the FEl and a few minutes with the PTO snowblower,once the tractor was put away I noticed the site glass on the side of the transmission was milky(ouch),now,I am trying to find out what kind of oil is in this unit,it has a spin on filter on top of the...

I purchased a used 5 ft Kubota blower 3 years ago for a good price,it had some modifications done to it,not certain why but the two lower angles were sliced and bent and then goop welded(not factory welds). So yesterday blowing the snow one of the angles weld's(sort of) broke,now my question...

Just checking to make sure,what should the voltage at the glow plugs be on a 12V system,once it goes through the dash coil indicator would it drop any?

Hey folks I think I saw on here last year who made these for Kubota,I'm looking for a parts list mainly how the cable wraps around every thing,thanks in advance

Seeing as we just received our 1st dusting of snow I thought I better get a circulating heat pump installed on my L2202,its going in the rad hose to the block,just wondering what the direction of normal flow is,I'm thinking from the block to the radiator?

Was just thinking,how many hours should a person get out of a well maintained 3 cylinder Kubota 26 HP?

I just purchased a used snow blower for a good price,I'm new to this tractoring stuff but not mech challenged(much). When I attache the blower to the hitch it sits about 3-4 inches off the skids to the ground,I can adjust the top link so the augers are hitting the dirt,just dont think this is...

Already posted this on the Grey tractor board"Would anyone know the correct front tires and size for this model,it now is running P205/70r14 on them,yes car radial tires,the rims are stamped 14x5,thanks in advance"

Would anyone know the correct front tires and size for this model,it now is running P205/70r14 on them,yes car radial tires,the rims are stamped 14x5,thanks in advance