Search results

Is it acceptable to heat tractor pivot pins to loosen hardened grease for ease in re-lube of pivot pin channels thru zerk fittings? I have heard that it is acceptable but would like some other input...Thank you all

Hi guys, thank you for the research and link to the CORRECT part number. Don't know why Messick's gave me the wrong part, especially when I enclosed a picture of the original plug...Oh well, glad it wasn't that expensive. You Da Best!

/// Yes, Wolfman you are correct. Thanks for taking a look!

Love your new format and the service you folks provide! Montana Rick

Greetings all, I need a little direction here. The below email was my attempt to replace the attached picture item; Messick's confirmed that the part numbers shown within were the correct items and I ordered same. However, the plug is NOT vented and does NOT have the rubber tube extension...

Thank you for the research and reply. Much appreciated. Not sure if I will try to split it or just wrangle it back in. Sent from my SM-G930V using Tapatalk

Hello, I recently removed this cover to find the hydraulic oil level plug on the crankcase.Lol While it is off, I would like to repaint the assembly. Has anyone ever split this cover where the lip seal is between the two parts? I don't want to damage the part but I also do not want to scratch...

Any recommendations for headphone use on 30hp tractor? Wired or wireless? Sent from my KFSUWI using Tapatalk

CaveCreekRay, Too clever! I like it and it very well could work even if I attached it to my ATV rear end. Would probably add hinge for rope lift or such. Thank you! Sent from my KFSUWI using Tapatalk

Lil foot, Yes I have done that in the past and can continue to tractor rake for awhile yet. The compounding problem is that the 1,100 ponderosa trees are doing so well that they are already outgrowing my 10ft x 10ft planted quadrants! Lol Sent from my KFSUWI using Tapatalk

Lugbolt Yikes, you are correct. I hadn't thought about the drive belt concern for wear and tear; probably not a good idea to pursue. Thank you Sent from my KFSUWI using Tapatalk

Fordtech86 Yes I am familiar with this type of rake and probably should have purchased it in lieu of their acreage rake for the ATV. Unfortunately, the acreage rake was not the correct application for my needs and the company would not assist in return and or exchange for their landscape rake. I...

Thank you for the reply. Yes, I do need something shorter than the combined tractor with three-point rake attached. Unfortunately, when I laid out my 80 rows of trees I did not leave enough turning radius for the tractor and equipment to perform properly. The tractor does have a FEL but I don't...

Easter greetings all, I do have a 30hp Kubota L2550 tractor, but need close quarter pine tree debris cleanup on 80 planted rows. Mostly pine cones & needles. Q: Is it reasonable to expect that a three-point hitch with a 2” receiver attached to the ATV would perform satisfactorily with the...

I tried the 3pt rotating wheel design and it was a disaster for pine needles and cones. Finally purchased a 3pt King Kutter Landscape Rake and am quite pleased - the tines are heavier. I maintain 1,100 pine trees on my property and also use the rake for debris/limbs and small rock piling and...

Luck of the Irish. ..No immediate needs now, just anticipating some down the road with a 1989 vintage used tractor. Thank you for your time. Sent from my GT-P5210 using Tapatalk

Looking for a workshop manual for the above. Willing to pay reasonable price for a download if someone has it available. I am retired and cannot quite afford the price a dealer wants to charge. Thank you Sent from my SCH-I545 using Tapatalk

A good and reasonable offer, unfortunately, I need a WSM for L2550 - just in case anyone might have one... Sent from my SCH-I545 using Tapatalk

Straight forward reply. Tk u Sent from my SCH-I545 using Tapatalk

Is there an issue using my ignition switch to shut down the engine versus pulling the inoperable kill switch lever? Refer L2550DT / 1988. Thank you Sent from my GT-P5210 using Tapatalk