Search results

I buy and sell a good bit of Kubota parts and recently bought a mower gearbox that I can't identify. I knew it was unusual, but thought I would comb through parts diagrams and figure it out. No luck! Never seen this one with the oil fill well protruding from the face of the gearbox. I believe...

I have a hydraulic fluid leak on my BX25 backhoe. I can see that it's at the coupling, but can't get a wrench on it to tighten the nut. So little of the nut protrudes from the hole that I can't get to it. I can see scratches where the previous owner also tried to tighten the nut. Any advice?

Really nice shape. Was used on a tractor at a school and almost never used to mow. Stored indoors for several years. Really nice deck. Can ship (from Florida) via Fastenal. Will get an exact quote if seriously interested. Usually $250 or less. $1,200 for the deck as pictured.

I bought new clevis hook mounts for the front bucket of my BX25D. Painted one with Kubota spray paint from the dealer ($15), and the other with Rustoleum Lobster Red ($7.50 on Amazon). These pictures are on the hood, which is very slightly sun faded. Rustoleum is on the left, Kubota on the...

I just bought a new to me BX25. Really nice machine, like new with the exception that the previous owner removed the top of the folding ROPS. They have been lost. I've tried sourcing them at Messicks, but they don't seem to sell them (looked for ROPS of several models - none). Anybody know...

I am parting out a G1800-S with 48" deck. The deck is rusted but all components (gearbox, spindles, etc.) are in good shape. Most parts are interchangeable with G1900. D662 engine starts and runs nicely. PM me for a video. Also parting out a ZD326 with D1105 engine. Engine had a cracked...

I'm helping a friend with a project and we're stumped. Rebuilding a Kubota D722 engine and bought a crankshaft that had been "ground." Took it to a machine shop and they confirmed it had been ground, and standard bearings are loose on the crank. The bearings that were with the crank don't...

I acquired a couple of G1800 and one GR2100 machines and am parting them out. I have pretty much everything at this point. The engines, all 3 cylinder: one D662 with only 500 hours ($900); one D662 with 1,200 hours ($750); and one D782 with 600 hours ($1,200). Each engine runs very well and...

This deck was original to my BX1860 and is in almost perfect shape. It probably has fewer than 50 hours of use. Paint is very nice with only a few scratches on the side. Zero rust. Always stored indoors. Only problem is a cracked plastic discharge chute (repaired). The deck is...

Found a great deal on a GCK60-BX grass catcher and knew it was made for older series BX tractors. Figured I could fab something up, or sell it if unable. To my delight, it was easier than I thought! If you have a GCK60-BX grass catcher, but a newer BX (not sure where the change was, but...

I have three almost complete machines I am parting out, a G1800, G1900, and F2400. At this point I have almost everything. PM me for contact information. In east Kentucky and can ship anywhere. Thanks, Delmar.

Parting out a complete, running, F2400 with a D1105 diesel engine. Deck was rusted too badly to salvage, but I do have some parts from it. I plan to sell major components whole (i.e., engine, transmission, etc.). Will ship large items. For reference, I shipped an engine from Kentucky to...

I talked in another thread about selling my old G1900S and planning to use my BX1860 as a primary mower. One drawback was that a 54" deck was the biggest one available for the 1860. After doing some research I found that a RCK60 23BX deck "fits" the 1860, but that it wasn't available due to...

Some of you helped with my recent query concerning what to mow with after selling my G1900S. I have a BX and most seemed to think I'd be happy with that as a primary mower. Only mow a one acre yard and some community property in our subdivision. Since my BX has a 48" deck and I have several...

I'm looking for a 60" mower deck for a Kubota BX. RCK60B 23BX. Looking for something in good condition. I'm in KY, but open to shipping if needed. PM and I'll send contact information. Thanks. Jeff

New to using a back blade and not sure what I'm doing. I use it on a BX and only real plan for it is to plow snow. I understand that the 3PH top link adjusts the lifting height and angle. Right now, it lifts the bottom of the plow about 7" or so off the ground. With some steep areas on my...

I purchased a G1900S a few years ago and that was the gateway drug to a real fascination with Kubota and diesels. I added a big brother, a BX1860, a year ago. I've bought, rehabbed (with considerable help from OTT folks!), and sold a few machines, not necessarily to make money but because...

I am in the process of selling a bunch of Kubota decks and miscellaneous parts. This was with a RC72 F deck, but I don't know what it is. I think it might be arms to hold an attachment, like a broom. I've checked parts diagrams to no avail. Thank for any help! 20161105_110854 by Jeff...

ONLY THING LEFT is ""complete 72" mower deck" I have one complete deck, a very nice RC72-29A. Low hours and in excellent shape. Spindles and gear box are fine. I have it on eBay for $1,250 but am open to reasonable offers. I also have 4 other decks, two RC60 (RC60B and RCK60-24B) and two...

I use a G1900S to mow a sloped lot. I've learned to lean and slow down in a couple of dangerous areas and much prefer the mowing experience over my BX1860 (although I wish the G1900 had 4WD or differential lock). I picked up a rear end weight made for a different Kubota machine. I didn't...